化学工业与工程
化學工業與工程
화학공업여공정
CHEMICAL INDUSTRY AND ENGINEERING
2007年
6期
471-475
,共5页
氧化锆%微乳液%纳米微粒%分散性
氧化鋯%微乳液%納米微粒%分散性
양화고%미유액%납미미립%분산성
利用微乳液法,在表面活性剂(TX-10)-正己醇-环己烷(体积比为1.0:1.3:7.7)组成的微乳液体系中,控制反应物浓度为0.02 mol/L,乙醇置换水量为200 mL,焙烧温度为450 ℃,制得高分散性纳米氧化锆.氮气吸附试验结果表明,纳米氧化锆颗粒表面的孔径分布与其分散性之间存在对应关系.XRD分析显示,产物最初为无定形ZrO2,经450 ℃焙烧3 h后,氧化锆主要以四方晶相为主,伴随少量单斜晶相,焙烧温度升高至750 ℃后,得到单一纯净的单斜晶相氧化锆.
利用微乳液法,在錶麵活性劑(TX-10)-正己醇-環己烷(體積比為1.0:1.3:7.7)組成的微乳液體繫中,控製反應物濃度為0.02 mol/L,乙醇置換水量為200 mL,焙燒溫度為450 ℃,製得高分散性納米氧化鋯.氮氣吸附試驗結果錶明,納米氧化鋯顆粒錶麵的孔徑分佈與其分散性之間存在對應關繫.XRD分析顯示,產物最初為無定形ZrO2,經450 ℃焙燒3 h後,氧化鋯主要以四方晶相為主,伴隨少量單斜晶相,焙燒溫度升高至750 ℃後,得到單一純淨的單斜晶相氧化鋯.
이용미유액법,재표면활성제(TX-10)-정기순-배기완(체적비위1.0:1.3:7.7)조성적미유액체계중,공제반응물농도위0.02 mol/L,을순치환수량위200 mL,배소온도위450 ℃,제득고분산성납미양화고.담기흡부시험결과표명,납미양화고과립표면적공경분포여기분산성지간존재대응관계.XRD분석현시,산물최초위무정형ZrO2,경450 ℃배소3 h후,양화고주요이사방정상위주,반수소량단사정상,배소온도승고지750 ℃후,득도단일순정적단사정상양화고.