热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2012年
9期
110-112
,共3页
张会龙%赵刚%叶传龙%廖志
張會龍%趙剛%葉傳龍%廖誌
장회룡%조강%협전룡%료지
E40船板钢%控轧控冷工艺%正火处理%显微组织%力学性能
E40船闆鋼%控軋控冷工藝%正火處理%顯微組織%力學性能
E40선판강%공알공랭공예%정화처리%현미조직%역학성능
采用250kg真空感应炉冶炼E40坯料,然后在实验室进行了控轧控冷的热轧试验和正火实验.对两种工艺生产的试样进行了力学性能测试.结果表明:与控轧控冷(TMCP)轧制的钢板相比,经同样轧制工艺后在910℃正火的钢,其屈服强度和抗拉强度均降低且低于船级社的标准;而控轧控冷(TMCP)的E40试验钢具有良好的综合力学性能.无论纵横向拉伸性能,以及-20~-60℃冲击韧性均完全满足船级社的性能标准.利用金相显微镜和扫描电镜对其组织进行检测.结果表明,两种工艺生产的钢板显微组织基本为多边形铁素体和无碳化物贝氏体及少量珠光体的复合组织;只不过经正火处理的钢板晶粒较细小,其内的混晶组织得到改善,伸长率和冲击韧性均有所提高.
採用250kg真空感應爐冶煉E40坯料,然後在實驗室進行瞭控軋控冷的熱軋試驗和正火實驗.對兩種工藝生產的試樣進行瞭力學性能測試.結果錶明:與控軋控冷(TMCP)軋製的鋼闆相比,經同樣軋製工藝後在910℃正火的鋼,其屈服彊度和抗拉彊度均降低且低于船級社的標準;而控軋控冷(TMCP)的E40試驗鋼具有良好的綜閤力學性能.無論縱橫嚮拉伸性能,以及-20~-60℃遲擊韌性均完全滿足船級社的性能標準.利用金相顯微鏡和掃描電鏡對其組織進行檢測.結果錶明,兩種工藝生產的鋼闆顯微組織基本為多邊形鐵素體和無碳化物貝氏體及少量珠光體的複閤組織;隻不過經正火處理的鋼闆晶粒較細小,其內的混晶組織得到改善,伸長率和遲擊韌性均有所提高.
채용250kg진공감응로야련E40배료,연후재실험실진행료공알공랭적열알시험화정화실험.대량충공예생산적시양진행료역학성능측시.결과표명:여공알공랭(TMCP)알제적강판상비,경동양알제공예후재910℃정화적강,기굴복강도화항랍강도균강저차저우선급사적표준;이공알공랭(TMCP)적E40시험강구유량호적종합역학성능.무론종횡향랍신성능,이급-20~-60℃충격인성균완전만족선급사적성능표준.이용금상현미경화소묘전경대기조직진행검측.결과표명,량충공예생산적강판현미조직기본위다변형철소체화무탄화물패씨체급소량주광체적복합조직;지불과경정화처리적강판정립교세소,기내적혼정조직득도개선,신장솔화충격인성균유소제고.