江苏电机工程
江囌電機工程
강소전궤공정
JIANGSU ELECTRICAL ENGINEERING
2006年
6期
23-24
,共2页
耦合电容器%预防性试验%不拆头%在线测量
耦閤電容器%預防性試驗%不拆頭%在線測量
우합전용기%예방성시험%불탁두%재선측량
在对串级耦合电容器进行预防性试验时需要拆头,给检修试验工作带来一定困难和危险.针对这一问题,提出采用不拆头方法做预防性试验.通过对这2种方法试验数据比较,发现所得的试验结果基本相同,不拆头方法可以准确测试绝缘电阻、电容量与介质损耗值.
在對串級耦閤電容器進行預防性試驗時需要拆頭,給檢脩試驗工作帶來一定睏難和危險.針對這一問題,提齣採用不拆頭方法做預防性試驗.通過對這2種方法試驗數據比較,髮現所得的試驗結果基本相同,不拆頭方法可以準確測試絕緣電阻、電容量與介質損耗值.
재대천급우합전용기진행예방성시험시수요탁두,급검수시험공작대래일정곤난화위험.침대저일문제,제출채용불탁두방법주예방성시험.통과대저2충방법시험수거비교,발현소득적시험결과기본상동,불탁두방법가이준학측시절연전조、전용량여개질손모치.