影像科学与光化学
影像科學與光化學
영상과학여광화학
IMAGING SCIENCE AND PHOTOCHEMISTRY
2010年
1期
37-46
,共10页
余尚先%丛培军%杨金瑞%邵正春%王大伟%顾江楠
餘尚先%叢培軍%楊金瑞%邵正春%王大偉%顧江楠
여상선%총배군%양금서%소정춘%왕대위%고강남
光/热成像%活性醚化物%酚类化合物%阻溶/促溶剂%分子设计
光/熱成像%活性醚化物%酚類化閤物%阻溶/促溶劑%分子設計
광/열성상%활성미화물%분류화합물%조용/촉용제%분자설계
photo/thermal imaging%active ether%phenol%dissolution inhibitor/accelerator%molecular design
本文提供了低分子量酚类化合物与乙烯基烷基醚合成醚化率百分之百的高酸解活性醚化物(以下简称活性醚化物)的一般合成方法,并对其合成条件的优选进行了讨论.建立了原料酚类化合物与成像性能密切相关的参数,如羟当量,临界碱水不可溶羟当量,临界碱水可溶羟当量,表征原料酚类化合物阻溶、促溶能力比的M_P/A值,按照成像要求所设定的碱水易溶、碱水可溶、碱水微溶、碱水不溶(难溶)的AS_(TW)参数.测定或推算出活性醚化物的平均醚当量、与分子量相关的校正醚当量、活性醚化物的M_E/A_E值以及M_E/A_E值与M_P/A值的比值(即DL值)等多项参数.围绕上述参数的建立,提出了一些经验计算公式,根据所建立的参数值以及多年来从事光/热成像实验的实践,提出了光/热成像用活性醚化物分子设计的有关规则.
本文提供瞭低分子量酚類化閤物與乙烯基烷基醚閤成醚化率百分之百的高痠解活性醚化物(以下簡稱活性醚化物)的一般閤成方法,併對其閤成條件的優選進行瞭討論.建立瞭原料酚類化閤物與成像性能密切相關的參數,如羥噹量,臨界堿水不可溶羥噹量,臨界堿水可溶羥噹量,錶徵原料酚類化閤物阻溶、促溶能力比的M_P/A值,按照成像要求所設定的堿水易溶、堿水可溶、堿水微溶、堿水不溶(難溶)的AS_(TW)參數.測定或推算齣活性醚化物的平均醚噹量、與分子量相關的校正醚噹量、活性醚化物的M_E/A_E值以及M_E/A_E值與M_P/A值的比值(即DL值)等多項參數.圍繞上述參數的建立,提齣瞭一些經驗計算公式,根據所建立的參數值以及多年來從事光/熱成像實驗的實踐,提齣瞭光/熱成像用活性醚化物分子設計的有關規則.
본문제공료저분자량분류화합물여을희기완기미합성미화솔백분지백적고산해활성미화물(이하간칭활성미화물)적일반합성방법,병대기합성조건적우선진행료토론.건립료원료분류화합물여성상성능밀절상관적삼수,여간당량,림계감수불가용간당량,림계감수가용간당량,표정원료분류화합물조용、촉용능력비적M_P/A치,안조성상요구소설정적감수역용、감수가용、감수미용、감수불용(난용)적AS_(TW)삼수.측정혹추산출활성미화물적평균미당량、여분자량상관적교정미당량、활성미화물적M_E/A_E치이급M_E/A_E치여M_P/A치적비치(즉DL치)등다항삼수.위요상술삼수적건립,제출료일사경험계산공식,근거소건립적삼수치이급다년래종사광/열성상실험적실천,제출료광/열성상용활성미화물분자설계적유관규칙.
A general method for synthesizing active ethers (with complete etherification) synthesized from vinyl alkyl ether and low molecular weight phenol is investigated and the optimum synthesis conditions are proposed in this paper. Established a series of parameters between phenol and imaging, e.g., hydroxy equivalent(N_(OH)), critical alkaline aqueous insoluble hydroxy equivalent, critical alkaline aqueous soluble hydroxy equivalent and M_P/A value interpreted as ratio of dissolution inhibition to dissolution acceleration. Established alkaline solubilities of phenol (AS_(TW)) based on various imaging requirements: highly alkaline soluble, alkaline soluble, slightly alkaline soluble and alkaline insoluble. Measured or calculated parameters of active ether, i.e. average ether equivalent, calibrated average ether equivalent related to molecular weight, M_E/A_E value and DL (ration of M_E/A_E to M_P/A). Proposed several empirical formulae and molecular design rules of active ether for photo/thermal imaging based on the above parameters as well as author′s experiences in photo/thermal imaging.