北京理工大学学报
北京理工大學學報
북경리공대학학보
JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY
2011年
4期
467-471
,共5页
黄超%任丽香%毛二可%何佩琨
黃超%任麗香%毛二可%何珮琨
황초%임려향%모이가%하패곤
X波段%直接数字合成%频率源%锁相环%宽带
X波段%直接數字閤成%頻率源%鎖相環%寬帶
X파단%직접수자합성%빈솔원%쇄상배%관대
针对快速跳频和低杂散的要求,提出一体化频率源设计方法,综合考虑了高速鉴频鉴相、大环路带宽设计和系统级直接数字合成(DDS)频率规划.利用这种设计方法,采用DDS激励快速锁相环(FL-PLL)结构,成功设计并实现了一种宽带快速跳频X波段频率源.实测结果表明,其输出频带为10.5~11.5 GHz;在极端1 GHz频率跳变条件下,正向跳频时间为0.42μs,负向跳频时间为0.30 μs;无失真动态范围为-61.3 dBc;相位噪声为-100 dBc/Hz@1 kHz;最小跳频间隔为12 Hz.
針對快速跳頻和低雜散的要求,提齣一體化頻率源設計方法,綜閤攷慮瞭高速鑒頻鑒相、大環路帶寬設計和繫統級直接數字閤成(DDS)頻率規劃.利用這種設計方法,採用DDS激勵快速鎖相環(FL-PLL)結構,成功設計併實現瞭一種寬帶快速跳頻X波段頻率源.實測結果錶明,其輸齣頻帶為10.5~11.5 GHz;在極耑1 GHz頻率跳變條件下,正嚮跳頻時間為0.42μs,負嚮跳頻時間為0.30 μs;無失真動態範圍為-61.3 dBc;相位譟聲為-100 dBc/Hz@1 kHz;最小跳頻間隔為12 Hz.
침대쾌속도빈화저잡산적요구,제출일체화빈솔원설계방법,종합고필료고속감빈감상、대배로대관설계화계통급직접수자합성(DDS)빈솔규화.이용저충설계방법,채용DDS격려쾌속쇄상배(FL-PLL)결구,성공설계병실현료일충관대쾌속도빈X파단빈솔원.실측결과표명,기수출빈대위10.5~11.5 GHz;재겁단1 GHz빈솔도변조건하,정향도빈시간위0.42μs,부향도빈시간위0.30 μs;무실진동태범위위-61.3 dBc;상위조성위-100 dBc/Hz@1 kHz;최소도빈간격위12 Hz.