现代涂料与涂装
現代塗料與塗裝
현대도료여도장
MODERN PAINT & FINISHING
2011年
8期
9-11
,共3页
李炎%可同欢%张燕南%刘方方
李炎%可同歡%張燕南%劉方方
리염%가동환%장연남%류방방
聚苯胺%乳液%涂料%水性%合成
聚苯胺%乳液%塗料%水性%閤成
취분알%유액%도료%수성%합성
polyaniline%emulsion%coatings%waterborne%synthesis
利用乳液聚合法制备了可以直接作为防腐主要组分之一的水性聚苯胺,并得到了较优配方和工艺。其中合成聚苯胺基本配方为：DBSA10.69 g,An 9.3 g,APS22.82 g,水80~90 mL;工艺为：APS溶液和An同时滴加,聚合反应时间为5 h。
利用乳液聚閤法製備瞭可以直接作為防腐主要組分之一的水性聚苯胺,併得到瞭較優配方和工藝。其中閤成聚苯胺基本配方為：DBSA10.69 g,An 9.3 g,APS22.82 g,水80~90 mL;工藝為：APS溶液和An同時滴加,聚閤反應時間為5 h。
이용유액취합법제비료가이직접작위방부주요조분지일적수성취분알,병득도료교우배방화공예。기중합성취분알기본배방위：DBSA10.69 g,An 9.3 g,APS22.82 g,수80~90 mL;공예위：APS용액화An동시적가,취합반응시간위5 h。
Waterborne polyaniline which can be used as main composite of anticorrosive coating was prepared by using emulsion polymerization method and optimum formula and process were also obtained.The basic formula for synthesis of polyaniline：DBSA 10.69 g,An 9.3 g,APS 22.82 g,water 80 ~ 90 mL.The synthesis process as follow：APS solution and An were dropped into the system at the same time and polymerization time is about 5 h.
