黄金科学技术
黃金科學技術
황금과학기술
GOLD SCIENCE AND TECHNOLOGY
2011年
3期
79-82
,共4页
张永文%刘新会%王凯%张争京
張永文%劉新會%王凱%張爭京
장영문%류신회%왕개%장쟁경
原子荧光光谱法%砷%锑%微细浸染型金矿
原子熒光光譜法%砷%銻%微細浸染型金礦
원자형광광보법%신%제%미세침염형금광
秦岭地区金龙山和寨上微细浸染型金矿床矿石样品中砷、锑含量均较高,采用原子荧光光谱法测定时存在双通道干扰、荧光饱和及荧光猝灭等问题,测定难度大.经过多年对比分析,建立了针对“锑含量高、砷含量低,砷含量高、锑含量低及含有机物”3种难测试样品的测试方法,可确保检测数据准确可靠.主要方法:As、Sb同时测定过程中,对于同一样品,当砷值<10 μg/L、锑值>50μg/L时,应采用单道测定;当锑值<1μg/L、砷值>200 μg/L时,也采用单道测定;当样品含量较高时,存在荧光猝灭现象,应当用稀释的办法解决;AFS-830原子荧光光度计为自动进样装置,低含量样品一般可采用自动进样,高含量样品采用手动进样,以保证监控每一个样品;为了方便高含量锑的测定,锑的最高点可取到50 μg/L,但砷浓度达到200 μg/L时,超出了砷的线性范围,在测定完标准曲线后,去掉砷曲线中超过200 μg/L的点.
秦嶺地區金龍山和寨上微細浸染型金礦床礦石樣品中砷、銻含量均較高,採用原子熒光光譜法測定時存在雙通道榦擾、熒光飽和及熒光猝滅等問題,測定難度大.經過多年對比分析,建立瞭針對“銻含量高、砷含量低,砷含量高、銻含量低及含有機物”3種難測試樣品的測試方法,可確保檢測數據準確可靠.主要方法:As、Sb同時測定過程中,對于同一樣品,噹砷值<10 μg/L、銻值>50μg/L時,應採用單道測定;噹銻值<1μg/L、砷值>200 μg/L時,也採用單道測定;噹樣品含量較高時,存在熒光猝滅現象,應噹用稀釋的辦法解決;AFS-830原子熒光光度計為自動進樣裝置,低含量樣品一般可採用自動進樣,高含量樣品採用手動進樣,以保證鑑控每一箇樣品;為瞭方便高含量銻的測定,銻的最高點可取到50 μg/L,但砷濃度達到200 μg/L時,超齣瞭砷的線性範圍,在測定完標準麯線後,去掉砷麯線中超過200 μg/L的點.
진령지구금룡산화채상미세침염형금광상광석양품중신、제함량균교고,채용원자형광광보법측정시존재쌍통도간우、형광포화급형광졸멸등문제,측정난도대.경과다년대비분석,건립료침대“제함량고、신함량저,신함량고、제함량저급함유궤물”3충난측시양품적측시방법,가학보검측수거준학가고.주요방법:As、Sb동시측정과정중,대우동일양품,당신치<10 μg/L、제치>50μg/L시,응채용단도측정;당제치<1μg/L、신치>200 μg/L시,야채용단도측정;당양품함량교고시,존재형광졸멸현상,응당용희석적판법해결;AFS-830원자형광광도계위자동진양장치,저함량양품일반가채용자동진양,고함량양품채용수동진양,이보증감공매일개양품;위료방편고함량제적측정,제적최고점가취도50 μg/L,단신농도체도200 μg/L시,초출료신적선성범위,재측정완표준곡선후,거도신곡선중초과200 μg/L적점.