化工进展
化工進展
화공진전
CHEMICAL INDUSTRY AND ENGINEERING PROGRESS
2007年
11期
1631-1635
,共5页
欧阳朝斌%郭占成%万年青%乔琦
歐暘朝斌%郭佔成%萬年青%喬琦
구양조빈%곽점성%만년청%교기
煤%重质油%共气化%低碳烯烃%热态模拟
煤%重質油%共氣化%低碳烯烴%熱態模擬
매%중질유%공기화%저탄희경%열태모의
以固定床为反应器,焦炭和胜利常压渣油为原料,进行煤与重质油共气化热态模拟实验,考察了不同操作参数对出口气体成分及结焦生成物的影响.结果表明:当m(氧气)∶m(水蒸气)∶m(渣油)为0.3∶1.0∶1.0、裂解温度为800 ℃、停留时间小于0.5 s时,烯烃(C2H4+C3H6)、烷烃(CH4+C2H6)和合成气(H2+CO)的体积分数分别为24%、28%和37%.应用扫描电镜观察了焦炭介质表面上结焦生成物的形貌,发现通氧气后结焦生成物残留量较少.热态模拟实验结果进一步表明,煤与重质油共气化可以制备低碳烯烃,同时联产合成气,且能有效地解决重质油裂解造成的结焦问题.
以固定床為反應器,焦炭和勝利常壓渣油為原料,進行煤與重質油共氣化熱態模擬實驗,攷察瞭不同操作參數對齣口氣體成分及結焦生成物的影響.結果錶明:噹m(氧氣)∶m(水蒸氣)∶m(渣油)為0.3∶1.0∶1.0、裂解溫度為800 ℃、停留時間小于0.5 s時,烯烴(C2H4+C3H6)、烷烴(CH4+C2H6)和閤成氣(H2+CO)的體積分數分彆為24%、28%和37%.應用掃描電鏡觀察瞭焦炭介質錶麵上結焦生成物的形貌,髮現通氧氣後結焦生成物殘留量較少.熱態模擬實驗結果進一步錶明,煤與重質油共氣化可以製備低碳烯烴,同時聯產閤成氣,且能有效地解決重質油裂解造成的結焦問題.
이고정상위반응기,초탄화성리상압사유위원료,진행매여중질유공기화열태모의실험,고찰료불동조작삼수대출구기체성분급결초생성물적영향.결과표명:당m(양기)∶m(수증기)∶m(사유)위0.3∶1.0∶1.0、렬해온도위800 ℃、정류시간소우0.5 s시,희경(C2H4+C3H6)、완경(CH4+C2H6)화합성기(H2+CO)적체적분수분별위24%、28%화37%.응용소묘전경관찰료초탄개질표면상결초생성물적형모,발현통양기후결초생성물잔류량교소.열태모의실험결과진일보표명,매여중질유공기화가이제비저탄희경,동시련산합성기,차능유효지해결중질유렬해조성적결초문제.