天然气地球科学
天然氣地毬科學
천연기지구과학
NATURAL GAS GEOSCIENCE
2008年
1期
133-136
,共4页
产能%出砂%防砂工艺%实验模拟
產能%齣砂%防砂工藝%實驗模擬
산능%출사%방사공예%실험모의
对于各种防砂工艺下的产能,国内外都进行了不同程度的研究,但由于物理模拟实验比较复杂,目前的研究大多局限于理论和数学模型.首先利用三维物理模拟实验装置对塔里木盆地东河油田拟采用的筛管砾石充填、正对产层直接下筛管、压裂充填3种防砂工艺进行了模拟,并比较了这3种不同防砂工艺下的产能,然后将物理模拟实验测量的产能值与所建立的理论模型计算结果进行了对比,结果表明:三维物理模拟实验能较真实地模拟3种不同的防砂工艺和定量地反映其间的产能差异;在相同的实验条件下,产能大小依次为压裂充填防砂工艺、砾石充填防砂工艺、面对产层直接下筛管防砂工艺;三维物理模拟实验模型把防砂和产能有机结合,可用此模型对不同防砂工艺下的防砂效果及油井产能做出正确的评价.
對于各種防砂工藝下的產能,國內外都進行瞭不同程度的研究,但由于物理模擬實驗比較複雜,目前的研究大多跼限于理論和數學模型.首先利用三維物理模擬實驗裝置對塔裏木盆地東河油田擬採用的篩管礫石充填、正對產層直接下篩管、壓裂充填3種防砂工藝進行瞭模擬,併比較瞭這3種不同防砂工藝下的產能,然後將物理模擬實驗測量的產能值與所建立的理論模型計算結果進行瞭對比,結果錶明:三維物理模擬實驗能較真實地模擬3種不同的防砂工藝和定量地反映其間的產能差異;在相同的實驗條件下,產能大小依次為壓裂充填防砂工藝、礫石充填防砂工藝、麵對產層直接下篩管防砂工藝;三維物理模擬實驗模型把防砂和產能有機結閤,可用此模型對不同防砂工藝下的防砂效果及油井產能做齣正確的評價.
대우각충방사공예하적산능,국내외도진행료불동정도적연구,단유우물리모의실험비교복잡,목전적연구대다국한우이론화수학모형.수선이용삼유물리모의실험장치대탑리목분지동하유전의채용적사관력석충전、정대산층직접하사관、압렬충전3충방사공예진행료모의,병비교료저3충불동방사공예하적산능,연후장물리모의실험측량적산능치여소건립적이론모형계산결과진행료대비,결과표명:삼유물리모의실험능교진실지모의3충불동적방사공예화정량지반영기간적산능차이;재상동적실험조건하,산능대소의차위압렬충전방사공예、력석충전방사공예、면대산층직접하사관방사공예;삼유물리모의실험모형파방사화산능유궤결합,가용차모형대불동방사공예하적방사효과급유정산능주출정학적평개.