光学精密工程
光學精密工程
광학정밀공정
OPTICS AND PRECISION ENGINEERING
2009年
6期
1274-1278
,共5页
徐晨%戴天明%宋义超%李晓波%邓琛
徐晨%戴天明%宋義超%李曉波%鄧琛
서신%대천명%송의초%리효파%산침
红外探测器%温度噪声%热机械噪声%等效噪声功率%微机电系统
紅外探測器%溫度譟聲%熱機械譟聲%等效譟聲功率%微機電繫統
홍외탐측기%온도조성%열궤계조성%등효조성공솔%미궤전계통
infrared detector%temperature-fluctuation noise%mechanical-thermal noise%Noise Equivalent Power(NEP)%MEMS
由MEMS技术制备的特气室温红外探测器的噪声主要包括温度噪声、机械热噪声和背景噪声.从理论上建立了器件的基本热模型,推导得到器件的等效热熔和等效热导分别为8.1 μJ/K和1.0×10-3 W/K,温度噪声约为1.73×10-10 W/Hz1/2;通过器件的工作机理和能量均分原理,推导得到热机械噪声的等效噪声功率约为9.96×10-9 W/Hz1/2,器件的背景噪声约为3.22×10-11 W/Hz1/2,从而得出器件的归一化探测率约为9.03×106 cm·Hz1/2/W.实验表明,器件的噪声中热机械噪声为主要噪声源,大小主要由浓硼硅薄膜的机械性能和器件结构决定,可以通过增大薄膜厚度,减小薄膜面积,从而增加薄膜的特征频率的方法来减小器件受外界振动的影响,但以降低器件的灵敏度为代价.另外环境振动噪声也对器件的影响很大.为了减小外界气压和温度变化的影响,提出了一种新型的双腔结构来减小和平衡外界环境变化引入的噪声.
由MEMS技術製備的特氣室溫紅外探測器的譟聲主要包括溫度譟聲、機械熱譟聲和揹景譟聲.從理論上建立瞭器件的基本熱模型,推導得到器件的等效熱鎔和等效熱導分彆為8.1 μJ/K和1.0×10-3 W/K,溫度譟聲約為1.73×10-10 W/Hz1/2;通過器件的工作機理和能量均分原理,推導得到熱機械譟聲的等效譟聲功率約為9.96×10-9 W/Hz1/2,器件的揹景譟聲約為3.22×10-11 W/Hz1/2,從而得齣器件的歸一化探測率約為9.03×106 cm·Hz1/2/W.實驗錶明,器件的譟聲中熱機械譟聲為主要譟聲源,大小主要由濃硼硅薄膜的機械性能和器件結構決定,可以通過增大薄膜厚度,減小薄膜麵積,從而增加薄膜的特徵頻率的方法來減小器件受外界振動的影響,但以降低器件的靈敏度為代價.另外環境振動譟聲也對器件的影響很大.為瞭減小外界氣壓和溫度變化的影響,提齣瞭一種新型的雙腔結構來減小和平衡外界環境變化引入的譟聲.
유MEMS기술제비적특기실온홍외탐측기적조성주요포괄온도조성、궤계열조성화배경조성.종이론상건립료기건적기본열모형,추도득도기건적등효열용화등효열도분별위8.1 μJ/K화1.0×10-3 W/K,온도조성약위1.73×10-10 W/Hz1/2;통과기건적공작궤리화능량균분원리,추도득도열궤계조성적등효조성공솔약위9.96×10-9 W/Hz1/2,기건적배경조성약위3.22×10-11 W/Hz1/2,종이득출기건적귀일화탐측솔약위9.03×106 cm·Hz1/2/W.실험표명,기건적조성중열궤계조성위주요조성원,대소주요유농붕규박막적궤계성능화기건결구결정,가이통과증대박막후도,감소박막면적,종이증가박막적특정빈솔적방법래감소기건수외계진동적영향,단이강저기건적령민도위대개.령외배경진동조성야대기건적영향흔대.위료감소외계기압화온도변화적영향,제출료일충신형적쌍강결구래감소화평형외계배경변화인입적조성.
The noises of a special gas IR detector fabricated by MEMS mainly include the temperature-fluctuation noise, mechanical-thermal noise and the background noise. Based on thermal conduction theory, a thermal model is built up to get the effective thermal content and the effective thermal conductivity to be 1.0×10-3 W/K and 8.1 μJ/K,respectively ,and the temperature-fluctuation noise is nearly1.73×10-10 W/Hz1/2. According to the device operating principle and energy equipartition theory of thermodynamics, the mechanical-thermal noise is9.96×10-9 W/Hz1/2,and the background noise is nearly 3.22×10-11 W/Hz1/2, so that the normalized detectivity is deduced to be 9.03×106 cm·Hz1/2/W. Experiment results show that the mechanical-thermal noise coming from the structure and the mechanical performance of a heavily doped Si membrane is the main noise of the device, which can be reduced by minishing the membrane area and extending the membrane thickness to increase the mechanical resonant frequency of the membrane,but should be at the price of reducing the sensitivity of the device. The vibration of environment also influences on the device a lot. To decrease the noise coming from the fluctuation of air pressure and the temperature fluctuation of the surrounding, a new double-cell counteracting structure is presented.