粉末冶金材料科学与工程
粉末冶金材料科學與工程
분말야금재료과학여공정
POWDER METALLURGY MATERIALS SCIENCE AND ENGINEERING
2009年
3期
174-178
,共5页
逯峙%陈仕奇%刘咏%郭屹宾
逯峙%陳仕奇%劉詠%郭屹賓
록치%진사기%류영%곽흘빈
气体雾化%过热度%雾化压力%铁基高温合金%粉末
氣體霧化%過熱度%霧化壓力%鐵基高溫閤金%粉末
기체무화%과열도%무화압력%철기고온합금%분말
采用紧耦合气体雾化法制备Fe-13%Cr-3%W高温合金粉末,研究雾化气体压力和熔体过热度对粉末粒度及形貌的影响.结果表明,增加雾化气体压力和熔体过热度可以降低粉末的中位径,小于45 μm和小于20 μm粉末的收得率明显增加.粉末形貌均为球形,存在卫星结构粉末及不规则状粉末,雾化气体压力和过热度对形貌的影响不大.还分析了雾化参数对雾化过程及粉末粒度的影响机理.
採用緊耦閤氣體霧化法製備Fe-13%Cr-3%W高溫閤金粉末,研究霧化氣體壓力和鎔體過熱度對粉末粒度及形貌的影響.結果錶明,增加霧化氣體壓力和鎔體過熱度可以降低粉末的中位徑,小于45 μm和小于20 μm粉末的收得率明顯增加.粉末形貌均為毬形,存在衛星結構粉末及不規則狀粉末,霧化氣體壓力和過熱度對形貌的影響不大.還分析瞭霧化參數對霧化過程及粉末粒度的影響機理.
채용긴우합기체무화법제비Fe-13%Cr-3%W고온합금분말,연구무화기체압력화용체과열도대분말립도급형모적영향.결과표명,증가무화기체압력화용체과열도가이강저분말적중위경,소우45 μm화소우20 μm분말적수득솔명현증가.분말형모균위구형,존재위성결구분말급불규칙상분말,무화기체압력화과열도대형모적영향불대.환분석료무화삼수대무화과정급분말립도적영향궤리.