固体火箭技术
固體火箭技術
고체화전기술
JOURNAL OF SOLID ROCKET TECHNOLOGY
2008年
2期
193-197
,共5页
高国新%郑元锁%孙捷%谭溢波%金志浩
高國新%鄭元鎖%孫捷%譚溢波%金誌浩
고국신%정원쇄%손첩%담일파%금지호
结炭层强度%针入深度%加载负荷%芳纶纤维
結炭層彊度%針入深度%加載負荷%芳綸纖維
결탄층강도%침입심도%가재부하%방륜섬유
利用改装的厚度计测试结炭层的针入深度,以此来表征材料结炭层的强度,分别考察了测试次数、圆锥针半顶角大小、测试区域和加载负荷对针入深度的影响,发现当测试次数为5次、圆锥针的半顶角为15°、测试区域为距烧蚀中心3 mm的圆形区域内、加载负荷为600~800 g时,所测针入深度数据分散性小、准确度高,能充分反映结炭层的强度.同时,结合不同芳纶用量时材料结炭层的针入深度和材料烧蚀速率分析,发现利用平均针入深度表征结炭层的强度,可科学地考察绝热层材料的耐烧蚀、抗冲蚀性能.
利用改裝的厚度計測試結炭層的針入深度,以此來錶徵材料結炭層的彊度,分彆攷察瞭測試次數、圓錐針半頂角大小、測試區域和加載負荷對針入深度的影響,髮現噹測試次數為5次、圓錐針的半頂角為15°、測試區域為距燒蝕中心3 mm的圓形區域內、加載負荷為600~800 g時,所測針入深度數據分散性小、準確度高,能充分反映結炭層的彊度.同時,結閤不同芳綸用量時材料結炭層的針入深度和材料燒蝕速率分析,髮現利用平均針入深度錶徵結炭層的彊度,可科學地攷察絕熱層材料的耐燒蝕、抗遲蝕性能.
이용개장적후도계측시결탄층적침입심도,이차래표정재료결탄층적강도,분별고찰료측시차수、원추침반정각대소、측시구역화가재부하대침입심도적영향,발현당측시차수위5차、원추침적반정각위15°、측시구역위거소식중심3 mm적원형구역내、가재부하위600~800 g시,소측침입심도수거분산성소、준학도고,능충분반영결탄층적강도.동시,결합불동방륜용량시재료결탄층적침입심도화재료소식속솔분석,발현이용평균침입심도표정결탄층적강도,가과학지고찰절열층재료적내소식、항충식성능.