石油钻采工艺
石油鑽採工藝
석유찬채공예
OIL DRILLING & PRODUCTION TECHNOLOGY
2009年
5期
93-96
,共4页
注水开发%氮气泡沫调驱%稠油油藏%辽河油田
註水開髮%氮氣泡沫調驅%稠油油藏%遼河油田
주수개발%담기포말조구%주유유장%료하유전
waterflooding development%nitrogen foam profile control%heavy oil reservoir%Liaohe Oilfield
辽河油田稠油油藏大部分采取注水开发方式生产,现已进入高含水开发阶段.随着弱凝胶调剖堵水施工轮次的增加,开发效果呈递减趋势.为改善油田注水开发效果和提高采收率,进行了氮气泡沫调驱技术研究.室内对比了3种起泡剂的表面张力和半衰期,研究了交替段塞的大小、气液比及段塞组合对泡沫体系的阻力特性的影响.室内实验结果表明,实施泡沫调驱后,采收率提高9%.在海外河油田的2口注水井进行了矿场试验,见到了明显的增油降水效果.
遼河油田稠油油藏大部分採取註水開髮方式生產,現已進入高含水開髮階段.隨著弱凝膠調剖堵水施工輪次的增加,開髮效果呈遞減趨勢.為改善油田註水開髮效果和提高採收率,進行瞭氮氣泡沫調驅技術研究.室內對比瞭3種起泡劑的錶麵張力和半衰期,研究瞭交替段塞的大小、氣液比及段塞組閤對泡沫體繫的阻力特性的影響.室內實驗結果錶明,實施泡沫調驅後,採收率提高9%.在海外河油田的2口註水井進行瞭礦場試驗,見到瞭明顯的增油降水效果.
료하유전주유유장대부분채취주수개발방식생산,현이진입고함수개발계단.수착약응효조부도수시공륜차적증가,개발효과정체감추세.위개선유전주수개발효과화제고채수솔,진행료담기포말조구기술연구.실내대비료3충기포제적표면장력화반쇠기,연구료교체단새적대소、기액비급단새조합대포말체계적조력특성적영향.실내실험결과표명,실시포말조구후,채수솔제고9%.재해외하유전적2구주수정진행료광장시험,견도료명현적증유강수효과.
Water-flooding development is used for the production of most heavy oil reservoirs in Liaohe Oilfield, most of the reservoirs have been at the stage of high water cut. With the increase of number of weak gel profile control water plugging, the development decreases progressively. To improve the waterflooding development effect and enhance oil recovery in the oilfield, study is conducted on the nitrogen foam profile control technology. Through indoor experiment, the surface tension and half value period of the three types of foaming agents are compared. The effect of slug size, gas-liquid ratio, and slug combinations on the plugging of foam systems is studied.Results show that the oil recovery is enhanced by 9% after implementing foam profile control. Pilot test is conducted in two water injection wells in Haiwaihe Oilfield. Oil production increases remarkably and water decreases considerably.