沈阳工业大学学报
瀋暘工業大學學報
침양공업대학학보
JOURNAL OF SHENYANG POLYTECHNIC UNIVERSITY
2008年
4期
419-423,428
,共6页
陈立佳%茆亮%张思倩%马春艳%李锋
陳立佳%茆亮%張思倩%馬春豔%李鋒
진립가%묘량%장사천%마춘염%리봉
镁合金%热挤压%拉伸变形%动态应变时效%微观结构
鎂閤金%熱擠壓%拉伸變形%動態應變時效%微觀結構
미합금%열제압%랍신변형%동태응변시효%미관결구
为了确定试验温度和应变速率对热挤压AZ81镁合金拉伸变形行为的影响规律,在不同温度和应变速率下对其进行了拉伸试验,结合透射电镜分析了热挤压AZ81镁合金的微观组织结构与其拉伸变形行为间的关系.结果表明:在一定的应变速率和试验温度范围进行拉伸变形时,热挤压AZ81镁合金可发生动态应变时效,其中当应变速率在5×10-5~1×10-4s-1范围时,动态应变时效发生的温度范围为125-200℃,而当应变速率为5×10-4s-1时,动态应变时效发生的温度范围为150-200℃.在相同应变速率下,随着试验温度的升高,合金中的位错密度增大,位错与溶质原子的交互作用增强.
為瞭確定試驗溫度和應變速率對熱擠壓AZ81鎂閤金拉伸變形行為的影響規律,在不同溫度和應變速率下對其進行瞭拉伸試驗,結閤透射電鏡分析瞭熱擠壓AZ81鎂閤金的微觀組織結構與其拉伸變形行為間的關繫.結果錶明:在一定的應變速率和試驗溫度範圍進行拉伸變形時,熱擠壓AZ81鎂閤金可髮生動態應變時效,其中噹應變速率在5×10-5~1×10-4s-1範圍時,動態應變時效髮生的溫度範圍為125-200℃,而噹應變速率為5×10-4s-1時,動態應變時效髮生的溫度範圍為150-200℃.在相同應變速率下,隨著試驗溫度的升高,閤金中的位錯密度增大,位錯與溶質原子的交互作用增彊.
위료학정시험온도화응변속솔대열제압AZ81미합금랍신변형행위적영향규률,재불동온도화응변속솔하대기진행료랍신시험,결합투사전경분석료열제압AZ81미합금적미관조직결구여기랍신변형행위간적관계.결과표명:재일정적응변속솔화시험온도범위진행랍신변형시,열제압AZ81미합금가발생동태응변시효,기중당응변속솔재5×10-5~1×10-4s-1범위시,동태응변시효발생적온도범위위125-200℃,이당응변속솔위5×10-4s-1시,동태응변시효발생적온도범위위150-200℃.재상동응변속솔하,수착시험온도적승고,합금중적위착밀도증대,위착여용질원자적교호작용증강.