湖南城市学院学报(自然科学版)
湖南城市學院學報(自然科學版)
호남성시학원학보(자연과학판)
JOURNAL OF HUNAN CITY UNIVERSITY(NATURAL SCIENCE)
2010年
3期
1-4
,共4页
钢框架-钢筋混凝土筒体体系%日照温差作用%施工阶段%垂直度控制%竖向变形%侧向变形
鋼框架-鋼觔混凝土筒體體繫%日照溫差作用%施工階段%垂直度控製%豎嚮變形%側嚮變形
강광가-강근혼응토통체체계%일조온차작용%시공계단%수직도공제%수향변형%측향변형
研究了钢框架-钢筋混凝土筒体体系(S+RC)施工阶段在日照作用下,核芯筒和外框架的侧向与竖向变形问题.在分析S+RC结构施工特点和日照辐射作用的基础上,设计出日照温差计算工况,给出了4种日照温差作用温度计算工况参数.以大连世界贸易大厦结构为例建立了分段施工的计算模型,并利用有限元程序SAP2000,对模型在2种施工方案下的不同施工阶段的日照作用进行了分析,得出核芯筒和外框架在各施工段侧向跟竖向的最大变形曲线.分析结果表明,不同施工阶段筒体顶部侧向变形值在6~30 mm之间,竖向最大变形近7 mm;外钢框架侧向和竖向变形分别在2~20 mm与4~27 mm之间,由此可见日照对S+RC结构体系施工阶段的影响不容忽视.
研究瞭鋼框架-鋼觔混凝土筒體體繫(S+RC)施工階段在日照作用下,覈芯筒和外框架的側嚮與豎嚮變形問題.在分析S+RC結構施工特點和日照輻射作用的基礎上,設計齣日照溫差計算工況,給齣瞭4種日照溫差作用溫度計算工況參數.以大連世界貿易大廈結構為例建立瞭分段施工的計算模型,併利用有限元程序SAP2000,對模型在2種施工方案下的不同施工階段的日照作用進行瞭分析,得齣覈芯筒和外框架在各施工段側嚮跟豎嚮的最大變形麯線.分析結果錶明,不同施工階段筒體頂部側嚮變形值在6~30 mm之間,豎嚮最大變形近7 mm;外鋼框架側嚮和豎嚮變形分彆在2~20 mm與4~27 mm之間,由此可見日照對S+RC結構體繫施工階段的影響不容忽視.
연구료강광가-강근혼응토통체체계(S+RC)시공계단재일조작용하,핵심통화외광가적측향여수향변형문제.재분석S+RC결구시공특점화일조복사작용적기출상,설계출일조온차계산공황,급출료4충일조온차작용온도계산공황삼수.이대련세계무역대하결구위례건립료분단시공적계산모형,병이용유한원정서SAP2000,대모형재2충시공방안하적불동시공계단적일조작용진행료분석,득출핵심통화외광가재각시공단측향근수향적최대변형곡선.분석결과표명,불동시공계단통체정부측향변형치재6~30 mm지간,수향최대변형근7 mm;외강광가측향화수향변형분별재2~20 mm여4~27 mm지간,유차가견일조대S+RC결구체계시공계단적영향불용홀시.