清华大学学报(自然科学版)
清華大學學報(自然科學版)
청화대학학보(자연과학판)
JOURNAL OF TSINGHUA UNIVERSITY SCIENCE AND TECHNOLOGY
2005年
8期
1016-1019
,共4页
陈尧剑%黄天佑%张嘉%胡永沂%康进武
陳堯劍%黃天祐%張嘉%鬍永沂%康進武
진요검%황천우%장가%호영기%강진무
制模工艺%消失模%射料过程%两相流%数值模拟
製模工藝%消失模%射料過程%兩相流%數值模擬
제모공예%소실모%사료과정%량상류%수치모의
为了解消失模珠粒射料充填过程,采用Eulerian-Lagrangian方法建立了数学模型,并进行了数值模拟.在该模型中把空气处理成连续介质,采用SIMPLE方法在Euler网格中求解气相连续方程和动量方程; 珠粒为离散颗粒,其运动遵循Newton运动定律.采用自行设计的模具进行了实验验证,用数码摄像机记录了珠粒充填过程.数值模拟和实验结果显示: 在珠粒充填前期,模具底部空气流动速度快,携带能力强,到达模具底部的珠粒都被带到顶部堆积.珠粒充填超过2/3以后,珠粒才开始在底部堆积,最后形成一个椭圆形漩涡并逐步消失.数值模拟和实验结果符合较好.
為瞭解消失模珠粒射料充填過程,採用Eulerian-Lagrangian方法建立瞭數學模型,併進行瞭數值模擬.在該模型中把空氣處理成連續介質,採用SIMPLE方法在Euler網格中求解氣相連續方程和動量方程; 珠粒為離散顆粒,其運動遵循Newton運動定律.採用自行設計的模具進行瞭實驗驗證,用數碼攝像機記錄瞭珠粒充填過程.數值模擬和實驗結果顯示: 在珠粒充填前期,模具底部空氣流動速度快,攜帶能力彊,到達模具底部的珠粒都被帶到頂部堆積.珠粒充填超過2/3以後,珠粒纔開始在底部堆積,最後形成一箇橢圓形漩渦併逐步消失.數值模擬和實驗結果符閤較好.
위료해소실모주립사료충전과정,채용Eulerian-Lagrangian방법건립료수학모형,병진행료수치모의.재해모형중파공기처리성련속개질,채용SIMPLE방법재Euler망격중구해기상련속방정화동량방정; 주립위리산과립,기운동준순Newton운동정률.채용자행설계적모구진행료실험험증,용수마섭상궤기록료주립충전과정.수치모의화실험결과현시: 재주립충전전기,모구저부공기류동속도쾌,휴대능력강,도체모구저부적주립도피대도정부퇴적.주립충전초과2/3이후,주립재개시재저부퇴적,최후형성일개타원형선와병축보소실.수치모의화실험결과부합교호.