光学学报
光學學報
광학학보
ACTA OPTICA SINICA
2009年
11期
3183-3185
,共3页
李玉瑶%唐勇%林昭珩%李宁
李玉瑤%唐勇%林昭珩%李寧
리옥요%당용%림소형%리저
光学设计%二级光谱%波差法%复消色差%航空相机物镜
光學設計%二級光譜%波差法%複消色差%航空相機物鏡
광학설계%이급광보%파차법%복소색차%항공상궤물경
optical design%secondary spectrum%wave-aberration method%apochromatism%objective lens of aerial camera
为了满足航空相机物镜结构简单及高分辨率的要求,提出了一种基于波差法校正长焦距、宽波段的大面阵CCD航空相机物镜二级光谱的方法.介绍了二级光谱的基本原理,给出了波差法设计复消色差物镜的方程组.采用普通光学材料设计了复消色差航空相机物镜,系统焦距为400 mm,相对孔径为F/4,工作波段为420~850 nm.给出了光学系统图、纵向像差图及调制传递函数图.设计结果表明,采用该方法设计的航空相机物镜在60 lp/mm处各视场传递函数均在0.75以上,满足接收器件有效尺寸为36 mm×48 mm的大面阵CCD成像要求.
為瞭滿足航空相機物鏡結構簡單及高分辨率的要求,提齣瞭一種基于波差法校正長焦距、寬波段的大麵陣CCD航空相機物鏡二級光譜的方法.介紹瞭二級光譜的基本原理,給齣瞭波差法設計複消色差物鏡的方程組.採用普通光學材料設計瞭複消色差航空相機物鏡,繫統焦距為400 mm,相對孔徑為F/4,工作波段為420~850 nm.給齣瞭光學繫統圖、縱嚮像差圖及調製傳遞函數圖.設計結果錶明,採用該方法設計的航空相機物鏡在60 lp/mm處各視場傳遞函數均在0.75以上,滿足接收器件有效呎吋為36 mm×48 mm的大麵陣CCD成像要求.
위료만족항공상궤물경결구간단급고분변솔적요구,제출료일충기우파차법교정장초거、관파단적대면진CCD항공상궤물경이급광보적방법.개소료이급광보적기본원리,급출료파차법설계복소색차물경적방정조.채용보통광학재료설계료복소색차항공상궤물경,계통초거위400 mm,상대공경위F/4,공작파단위420~850 nm.급출료광학계통도、종향상차도급조제전체함수도.설계결과표명,채용해방법설계적항공상궤물경재60 lp/mm처각시장전체함수균재0.75이상,만족접수기건유효척촌위36 mm×48 mm적대면진CCD성상요구.
To meet the requirement for simple structure and high-resolution, a method for correcting secondary spectrum of large frame array CCD aerial camera's objective lens with long focal length and wide band based on wave aberration method is proposed. The principle of secondary spectrum is introduced and the equations of designing apochromatism objective lens based on wave aberration are presented. The apochromatism objective lens of aerial camera is designed by common optical materials. Objective' focal length is 400 mm, relative aperture is F/4,and work waveband is 420~850 nm. The figures of optical system, longitudinal aberration and modulation transfer function (MTF) are given. Designing results show that the MTF of every field above 0.75 in 60 lp/mm, and satisfy the requirements of imaging for large frame array CCD whose effective size is 36 mm× 48 mm.