电焊机
電銲機
전한궤
ELECTRIC WELDING MACHINE
2011年
4期
95-98
,共4页
叶克力%潘杰%韦汉玲%蒋成刚%王伟军
葉剋力%潘傑%韋漢玲%蔣成剛%王偉軍
협극력%반걸%위한령%장성강%왕위군
GYSD608焊条%工艺因素%硬度
GYSD608銲條%工藝因素%硬度
GYSD608한조%공예인소%경도
针对焊接电流形式与极性、层间温度、施焊场地温度、焊缝冷却方式以及焊接电流大小等工艺因素对GYSD608焊条堆焊金属硬度的影响进行了试验研究.结果表明,只要合理控制上述因素,就能获得较高的堆焊金属硬度值.为GYSD608焊条制定合理的焊接工艺及其推广应用起到指导作用.
針對銲接電流形式與極性、層間溫度、施銲場地溫度、銲縫冷卻方式以及銲接電流大小等工藝因素對GYSD608銲條堆銲金屬硬度的影響進行瞭試驗研究.結果錶明,隻要閤理控製上述因素,就能穫得較高的堆銲金屬硬度值.為GYSD608銲條製定閤理的銲接工藝及其推廣應用起到指導作用.
침대한접전류형식여겁성、층간온도、시한장지온도、한봉냉각방식이급한접전류대소등공예인소대GYSD608한조퇴한금속경도적영향진행료시험연구.결과표명,지요합리공제상술인소,취능획득교고적퇴한금속경도치.위GYSD608한조제정합리적한접공예급기추엄응용기도지도작용.