聚氨酯工业
聚氨酯工業
취안지공업
POLYURETHANE INDUSTRY
2008年
6期
35-38
,共4页
徐一飞%杨荆泉%李树材%刘宏%徐喆
徐一飛%楊荊泉%李樹材%劉宏%徐喆
서일비%양형천%리수재%류굉%서철
水性聚氨酯%防水透湿%聚乙二醇
水性聚氨酯%防水透濕%聚乙二醇
수성취안지%방수투습%취을이순
预聚体制备中采用异氰酸酯两步投料法(两步法),通过在分子链的软段中引入亲水性的聚乙二醇合成了防水透湿型阴离子水性聚氨酯(WPU).研究了聚乙二醇的相对分子质量、第一阶段预聚合中nNCO/nOH比值、异氰酸酯的复配对WPU乳胶的粒径、胶膜的力学性能和涂层织物的防水透湿性的影响.结果表明,在总/nNCO/nOH=1.3,第一阶段预聚合nNCO/nOH=1.1,聚己内酯二元醇/聚乙二醇(PEG)为70/30(其中PEG包括PEG1000和PEG2000,质量分数分别为24%和6%),DMPA质量分数为6%,异氰酸酯IPDI/MDI质量比为50/50时,合成出的WPU涂层织物在38℃时的透湿量超过4000g/(m2·d),且耐静水压力达到4.3 kPa,具有良好的防水透湿性.
預聚體製備中採用異氰痠酯兩步投料法(兩步法),通過在分子鏈的軟段中引入親水性的聚乙二醇閤成瞭防水透濕型陰離子水性聚氨酯(WPU).研究瞭聚乙二醇的相對分子質量、第一階段預聚閤中nNCO/nOH比值、異氰痠酯的複配對WPU乳膠的粒徑、膠膜的力學性能和塗層織物的防水透濕性的影響.結果錶明,在總/nNCO/nOH=1.3,第一階段預聚閤nNCO/nOH=1.1,聚己內酯二元醇/聚乙二醇(PEG)為70/30(其中PEG包括PEG1000和PEG2000,質量分數分彆為24%和6%),DMPA質量分數為6%,異氰痠酯IPDI/MDI質量比為50/50時,閤成齣的WPU塗層織物在38℃時的透濕量超過4000g/(m2·d),且耐靜水壓力達到4.3 kPa,具有良好的防水透濕性.
예취체제비중채용이청산지량보투료법(량보법),통과재분자련적연단중인입친수성적취을이순합성료방수투습형음리자수성취안지(WPU).연구료취을이순적상대분자질량、제일계단예취합중nNCO/nOH비치、이청산지적복배대WPU유효적립경、효막적역학성능화도층직물적방수투습성적영향.결과표명,재총/nNCO/nOH=1.3,제일계단예취합nNCO/nOH=1.1,취기내지이원순/취을이순(PEG)위70/30(기중PEG포괄PEG1000화PEG2000,질량분수분별위24%화6%),DMPA질량분수위6%,이청산지IPDI/MDI질량비위50/50시,합성출적WPU도층직물재38℃시적투습량초과4000g/(m2·d),차내정수압력체도4.3 kPa,구유량호적방수투습성.