广州化工
廣州化工
엄주화공
GUANGZHOU CHEMICAL INDUSTRY AND TECHNOLOGY
2011年
17期
88-89,105
,共3页
电镀%管理%处理工艺%污泥
電鍍%管理%處理工藝%汙泥
전도%관리%처리공예%오니
electroplating%management%treatment process%sludge
电镀企业的水污染比较严重,本文主要针对污染源的控制和治理工艺的选择进行了讨论,并提出了污泥的处理方法;最大限度的减少污染源,合理的选择处理工艺,不仅要确保处理后的水质达到排放标准,而且不能产生二次污染。
電鍍企業的水汙染比較嚴重,本文主要針對汙染源的控製和治理工藝的選擇進行瞭討論,併提齣瞭汙泥的處理方法;最大限度的減少汙染源,閤理的選擇處理工藝,不僅要確保處理後的水質達到排放標準,而且不能產生二次汙染。
전도기업적수오염비교엄중,본문주요침대오염원적공제화치리공예적선택진행료토론,병제출료오니적처리방법;최대한도적감소오염원,합리적선택처리공예,불부요학보처리후적수질체도배방표준,이차불능산생이차오염。
The wastewater pollution from electroplating enterprises was more serious at present.Therefore,the electroplating wastewater treatment became more and more important.The control and the treatment process of electroplating wastewater pollution were discussed.Then a method of sludge treatment was proposed as a focal point.Finally,the principle was point out emphatically that was minimizing pollution sources and selecting the treatment process should not only ensure the treated water quality meeting emissions standards,but also not produce any secondary pollution.