四川有色金属
四川有色金屬
사천유색금속
SICHUAN NONFERROUS METALS
2011年
4期
25-29
,共5页
贾永灿%查五生%安旭光%胡绍磊%宁霞蕊
賈永燦%查五生%安旭光%鬍紹磊%寧霞蕊
가영찬%사오생%안욱광%호소뢰%저하예
铝基烧结含油轴承%碳纳米管%高能球磨%粉末结构%压溃强度
鋁基燒結含油軸承%碳納米管%高能毬磨%粉末結構%壓潰彊度
려기소결함유축승%탄납미관%고능구마%분말결구%압궤강도
采用粉末冶金工艺制备铝粉、球磨铝粉和球磨混合粉末(添加2wt% MWCNTs的铝粉)烧结含油轴承,测定烧结样品的性能,并研究高能球磨对粉末性能及样品性能的影响规律和机理.结果表明,球磨后粉末颗粒尺寸减小并呈薄片状或层状,MWCNTs被剪断分散后包裹在铝粉颗粒中.粉末球磨易于原子扩散促进烧结颈的形成,提高烧结样品压溃强度.MWCNTs阻碍烧结过程中的收缩,提高含油率,但会降低压溃强度.添加2wt% MWCNTs的混合粉球磨后以610℃烧结,样品的压溃强度为245MPa,含油率约为13%,具有实际应用价值.
採用粉末冶金工藝製備鋁粉、毬磨鋁粉和毬磨混閤粉末(添加2wt% MWCNTs的鋁粉)燒結含油軸承,測定燒結樣品的性能,併研究高能毬磨對粉末性能及樣品性能的影響規律和機理.結果錶明,毬磨後粉末顆粒呎吋減小併呈薄片狀或層狀,MWCNTs被剪斷分散後包裹在鋁粉顆粒中.粉末毬磨易于原子擴散促進燒結頸的形成,提高燒結樣品壓潰彊度.MWCNTs阻礙燒結過程中的收縮,提高含油率,但會降低壓潰彊度.添加2wt% MWCNTs的混閤粉毬磨後以610℃燒結,樣品的壓潰彊度為245MPa,含油率約為13%,具有實際應用價值.
채용분말야금공예제비려분、구마려분화구마혼합분말(첨가2wt% MWCNTs적려분)소결함유축승,측정소결양품적성능,병연구고능구마대분말성능급양품성능적영향규률화궤리.결과표명,구마후분말과립척촌감소병정박편상혹층상,MWCNTs피전단분산후포과재려분과립중.분말구마역우원자확산촉진소결경적형성,제고소결양품압궤강도.MWCNTs조애소결과정중적수축,제고함유솔,단회강저압궤강도.첨가2wt% MWCNTs적혼합분구마후이610℃소결,양품적압궤강도위245MPa,함유솔약위13%,구유실제응용개치.