化工环保
化工環保
화공배보
ENVIRONMENTAL PROTECTION OF CHEMICAL INDUSTRY
2001年
1期
25-28
,共4页
张晓峰%别凤喜%艾海马%李江海
張曉峰%彆鳳喜%艾海馬%李江海
장효봉%별봉희%애해마%리강해
丁基锂%锂渣%碳酸锂
丁基鋰%鋰渣%碳痠鋰
정기리%리사%탄산리
介绍了用生产丁基锂过程中的锂渣制备碳酸锂的工艺过程及最佳工艺条件,在碳酸钠加入量为理论需要量的110%、pH为9-10、陈化时间为12h、干燥温度为450℃、干燥时间为2h的条件下,碳酸锂的总收率为70.3%左右,产品的纯度为98%左右,产品质量达到GB11075-89的三级标准。
介紹瞭用生產丁基鋰過程中的鋰渣製備碳痠鋰的工藝過程及最佳工藝條件,在碳痠鈉加入量為理論需要量的110%、pH為9-10、陳化時間為12h、榦燥溫度為450℃、榦燥時間為2h的條件下,碳痠鋰的總收率為70.3%左右,產品的純度為98%左右,產品質量達到GB11075-89的三級標準。
개소료용생산정기리과정중적리사제비탄산리적공예과정급최가공예조건,재탄산납가입량위이론수요량적110%、pH위9-10、진화시간위12h、간조온도위450℃、간조시간위2h적조건하,탄산리적총수솔위70.3%좌우,산품적순도위98%좌우,산품질량체도GB11075-89적삼급표준。
The process and optimum operation conditions for preparation oflithium carbonate from lithium slag generated in the production of butyl lithium are introduced.Under the conditions of 110% of the theoretic dosage of sodium carbonate,pH9-10,12 h of aging time,450℃ of drying temperature and 2 h of drying time,the total recovery rate of lithium reaches about 70.3% with purity of about 98%,the quality can meet the second grade of the national standard GB 11075-89.