哈尔滨理工大学学报
哈爾濱理工大學學報
합이빈리공대학학보
JOURNAL OF HARBIN UNIVERSITY OF SCIENCE AND TECHNOLOGY
2011年
4期
126-130
,共5页
2205不锈钢%腐蚀%盐卤水
2205不鏽鋼%腐蝕%鹽滷水
2205불수강%부식%염서수
针对制盐企业在开展精卤工程时,由于采用两碱法而改变了制盐卤水成分及其制盐工艺参数致使制盐主体设备(2205不锈钢)出现了严重的局部腐蚀问题,实验采用电化学方法研究了CO32-浓度、S2-浓度、pH值以及流速等工艺参数对2205不锈钢腐蚀行为的影响,研究结果表明:耐蚀条件为S2-:1.80g/L; pH:7.00;流速2.20m/s; CO32-:3.554×10-9 g/L时,对2205不锈钢腐蚀最少,可缓解设备腐蚀.
針對製鹽企業在開展精滷工程時,由于採用兩堿法而改變瞭製鹽滷水成分及其製鹽工藝參數緻使製鹽主體設備(2205不鏽鋼)齣現瞭嚴重的跼部腐蝕問題,實驗採用電化學方法研究瞭CO32-濃度、S2-濃度、pH值以及流速等工藝參數對2205不鏽鋼腐蝕行為的影響,研究結果錶明:耐蝕條件為S2-:1.80g/L; pH:7.00;流速2.20m/s; CO32-:3.554×10-9 g/L時,對2205不鏽鋼腐蝕最少,可緩解設備腐蝕.
침대제염기업재개전정서공정시,유우채용량감법이개변료제염서수성분급기제염공예삼수치사제염주체설비(2205불수강)출현료엄중적국부부식문제,실험채용전화학방법연구료CO32-농도、S2-농도、pH치이급류속등공예삼수대2205불수강부식행위적영향,연구결과표명:내식조건위S2-:1.80g/L; pH:7.00;류속2.20m/s; CO32-:3.554×10-9 g/L시,대2205불수강부식최소,가완해설비부식.