热能动力工程
熱能動力工程
열능동력공정
JOURNAL OF ENGINEERING FOR THERMAL ENERGY AND POWER
2005年
3期
306-309
,共4页
毕大鹏%李争起%赵振奇%杨敏强
畢大鵬%李爭起%趙振奇%楊敏彊
필대붕%리쟁기%조진기%양민강
燃煤锅炉%燃烧器%煤粉燃烧%水平浓淡%NOx
燃煤鍋爐%燃燒器%煤粉燃燒%水平濃淡%NOx
연매과로%연소기%매분연소%수평농담%NOx
某厂燃用褐煤六角切圆670 t/h炉为降低NOx排放,进行了如下改造:将原有燃烧器全部改造为水平浓淡风煤粉燃烧器,由于水平浓淡两股一次风煤粉气流各自远离燃料的化学当量比,可有效减少NOx的生成;在燃烧器顶部增设燃尽风喷口,使下部主燃烧区域处于氧浓度较低的气氛,可有效减少NOx的生成;将上、中层燃烧器的下二次风射流轴线向水冷壁偏转一定角度,加大上排燃烧器的二次风切圆直径,推迟二次风与一次风风粉混合物的混合,减少着火阶段的供氧量,可有效减少NOx的生成.试验结果证明,额定负荷下NOx排放量显著降低到315.4 mg/m3(O2=6%,干烟气),远低于排放标准,锅炉效率可达91.85%,比原设计值高1.32%.
某廠燃用褐煤六角切圓670 t/h爐為降低NOx排放,進行瞭如下改造:將原有燃燒器全部改造為水平濃淡風煤粉燃燒器,由于水平濃淡兩股一次風煤粉氣流各自遠離燃料的化學噹量比,可有效減少NOx的生成;在燃燒器頂部增設燃儘風噴口,使下部主燃燒區域處于氧濃度較低的氣氛,可有效減少NOx的生成;將上、中層燃燒器的下二次風射流軸線嚮水冷壁偏轉一定角度,加大上排燃燒器的二次風切圓直徑,推遲二次風與一次風風粉混閤物的混閤,減少著火階段的供氧量,可有效減少NOx的生成.試驗結果證明,額定負荷下NOx排放量顯著降低到315.4 mg/m3(O2=6%,榦煙氣),遠低于排放標準,鍋爐效率可達91.85%,比原設計值高1.32%.
모엄연용갈매륙각절원670 t/h로위강저NOx배방,진행료여하개조:장원유연소기전부개조위수평농담풍매분연소기,유우수평농담량고일차풍매분기류각자원리연료적화학당량비,가유효감소NOx적생성;재연소기정부증설연진풍분구,사하부주연소구역처우양농도교저적기분,가유효감소NOx적생성;장상、중층연소기적하이차풍사류축선향수랭벽편전일정각도,가대상배연소기적이차풍절원직경,추지이차풍여일차풍풍분혼합물적혼합,감소착화계단적공양량,가유효감소NOx적생성.시험결과증명,액정부하하NOx배방량현저강저도315.4 mg/m3(O2=6%,간연기),원저우배방표준,과로효솔가체91.85%,비원설계치고1.32%.