机械工程学报
機械工程學報
궤계공정학보
CHINESE JOURNAL OF MECHANICAL ENGINEERING
2011年
4期
37-41
,共5页
黄健康%石玗%卢立晖%樊丁
黃健康%石玗%盧立暉%樊丁
황건강%석우%로립휘%번정
脉冲MIG焊%建模仿真%弧长控制%快速原型
脈遲MIG銲%建模倣真%弧長控製%快速原型
맥충MIG한%건모방진%호장공제%쾌속원형
针对脉冲MIG焊过程中的电弧稳定性问题,建立基于尖端不稳定熔滴过渡理论的焊丝熔化动态电弧模型,并对焊接过程中的电弧电压、电弧长度及熔滴过渡尺寸进行仿真,得到与实际焊接相似的电弧电压波形,分析脉冲电流下熔滴过渡频率及影响电弧稳定性的因素,且进行弧长稳定控制的仿真研究,在此基础上运用快速原型技术建立铝合金脉冲MIG焊控制系统,采用电弧电压反馈对铝合金脉冲MIG焊过程进行送丝调节的弧长控制试验.研究表明:所建立的铝合金脉冲MIG焊焊丝熔化动态电弧模型很好反映了实际焊接过程,揭示出脉冲MIG焊焊接过程中熔滴过渡时间间隔具有一定的不确定性和电弧长度的不稳定性,通过电弧电压反馈控制可显著改善铝合金脉冲MIG焊过程电弧系统的稳定性.
針對脈遲MIG銲過程中的電弧穩定性問題,建立基于尖耑不穩定鎔滴過渡理論的銲絲鎔化動態電弧模型,併對銲接過程中的電弧電壓、電弧長度及鎔滴過渡呎吋進行倣真,得到與實際銲接相似的電弧電壓波形,分析脈遲電流下鎔滴過渡頻率及影響電弧穩定性的因素,且進行弧長穩定控製的倣真研究,在此基礎上運用快速原型技術建立鋁閤金脈遲MIG銲控製繫統,採用電弧電壓反饋對鋁閤金脈遲MIG銲過程進行送絲調節的弧長控製試驗.研究錶明:所建立的鋁閤金脈遲MIG銲銲絲鎔化動態電弧模型很好反映瞭實際銲接過程,揭示齣脈遲MIG銲銲接過程中鎔滴過渡時間間隔具有一定的不確定性和電弧長度的不穩定性,通過電弧電壓反饋控製可顯著改善鋁閤金脈遲MIG銲過程電弧繫統的穩定性.
침대맥충MIG한과정중적전호은정성문제,건립기우첨단불은정용적과도이론적한사용화동태전호모형,병대한접과정중적전호전압、전호장도급용적과도척촌진행방진,득도여실제한접상사적전호전압파형,분석맥충전류하용적과도빈솔급영향전호은정성적인소,차진행호장은정공제적방진연구,재차기출상운용쾌속원형기술건립려합금맥충MIG한공제계통,채용전호전압반궤대려합금맥충MIG한과정진행송사조절적호장공제시험.연구표명:소건립적려합금맥충MIG한한사용화동태전호모형흔호반영료실제한접과정,게시출맥충MIG한한접과정중용적과도시간간격구유일정적불학정성화전호장도적불은정성,통과전호전압반궤공제가현저개선려합금맥충MIG한과정전호계통적은정성.