科学技术与工程
科學技術與工程
과학기술여공정
SCIENCE TECHNOLOGY AND ENGINEERING
2010年
17期
4153-4157,4162
,共6页
有限元%拓扑优化%HyperMesh
有限元%拓撲優化%HyperMesh
유한원%탁복우화%HyperMesh
传统的光机结构设计是一个设计、计算机仿真、再设计反复迭代的过程,耗费的周期长、资金大.为了在短期内完成一套离轴三反系统支架以及附件的设计,基于有限元方法的设计流程,以拓扑优化为主,在Altair公司的HyperMesh/OptiStruct/Rodioss系列软件的平台上,完成了设计任务.最终模型质量19 kg(不含反射镜),轻量化率达17.9%,一阶模态达到了117.62 Hz.该设计从提出要求到交付工程图纸,一共仅用了4个月的时间.设计周期大大缩短,也节省了大量实验经费.
傳統的光機結構設計是一箇設計、計算機倣真、再設計反複迭代的過程,耗費的週期長、資金大.為瞭在短期內完成一套離軸三反繫統支架以及附件的設計,基于有限元方法的設計流程,以拓撲優化為主,在Altair公司的HyperMesh/OptiStruct/Rodioss繫列軟件的平檯上,完成瞭設計任務.最終模型質量19 kg(不含反射鏡),輕量化率達17.9%,一階模態達到瞭117.62 Hz.該設計從提齣要求到交付工程圖紙,一共僅用瞭4箇月的時間.設計週期大大縮短,也節省瞭大量實驗經費.
전통적광궤결구설계시일개설계、계산궤방진、재설계반복질대적과정,모비적주기장、자금대.위료재단기내완성일투리축삼반계통지가이급부건적설계,기우유한원방법적설계류정,이탁복우화위주,재Altair공사적HyperMesh/OptiStruct/Rodioss계렬연건적평태상,완성료설계임무.최종모형질량19 kg(불함반사경),경양화솔체17.9%,일계모태체도료117.62 Hz.해설계종제출요구도교부공정도지,일공부용료4개월적시간.설계주기대대축단,야절성료대량실험경비.