机电工程
機電工程
궤전공정
MECHANICAL & ELECTRICAL ENGINEERING MAGAZINE
2012年
6期
733-736
,共4页
人机界面%可编程控制器%闭环控制%防腐涂层
人機界麵%可編程控製器%閉環控製%防腐塗層
인궤계면%가편정공제기%폐배공제%방부도층
针对大型钢管防腐涂层在自动涂装生产线中由于大型钢管的行进速度变化不均造成漆膜厚度不均匀、油漆损耗过大的问题,在大型钢管防腐涂层自动涂装生产线中采用了人机界面(HMI)与可编程控制器(PLC)控制系统、激光位移传感器测速装置对大型钢管行进速度实行闭环控制,控制大型钢管匀速行进.通过实际应用分析,对比测量开环、闭环速度历史曲线变化情况,同时在喷涂参数相同的情况下,研究了闭环控制前和闭环控制后大型钢管防腐涂层漆膜厚度的变化情况.研究结果表明:基于HMI与PLC的位移闭环控制系统能有效地解决由于大型钢管在行进过程中速度变化不均所造成的漆膜厚度不均匀、油漆损耗过大的问题,漆膜厚度的变化幅度由原±30%降至±10%左右,证明基于HMI与PLC的位移闭环控制系统在大型钢管防腐涂层自动涂装生产线上的应用是可行的.
針對大型鋼管防腐塗層在自動塗裝生產線中由于大型鋼管的行進速度變化不均造成漆膜厚度不均勻、油漆損耗過大的問題,在大型鋼管防腐塗層自動塗裝生產線中採用瞭人機界麵(HMI)與可編程控製器(PLC)控製繫統、激光位移傳感器測速裝置對大型鋼管行進速度實行閉環控製,控製大型鋼管勻速行進.通過實際應用分析,對比測量開環、閉環速度歷史麯線變化情況,同時在噴塗參數相同的情況下,研究瞭閉環控製前和閉環控製後大型鋼管防腐塗層漆膜厚度的變化情況.研究結果錶明:基于HMI與PLC的位移閉環控製繫統能有效地解決由于大型鋼管在行進過程中速度變化不均所造成的漆膜厚度不均勻、油漆損耗過大的問題,漆膜厚度的變化幅度由原±30%降至±10%左右,證明基于HMI與PLC的位移閉環控製繫統在大型鋼管防腐塗層自動塗裝生產線上的應用是可行的.
침대대형강관방부도층재자동도장생산선중유우대형강관적행진속도변화불균조성칠막후도불균균、유칠손모과대적문제,재대형강관방부도층자동도장생산선중채용료인궤계면(HMI)여가편정공제기(PLC)공제계통、격광위이전감기측속장치대대형강관행진속도실행폐배공제,공제대형강관균속행진.통과실제응용분석,대비측량개배、폐배속도역사곡선변화정황,동시재분도삼수상동적정황하,연구료폐배공제전화폐배공제후대형강관방부도층칠막후도적변화정황.연구결과표명:기우HMI여PLC적위이폐배공제계통능유효지해결유우대형강관재행진과정중속도변화불균소조성적칠막후도불균균、유칠손모과대적문제,칠막후도적변화폭도유원±30%강지±10%좌우,증명기우HMI여PLC적위이폐배공제계통재대형강관방부도층자동도장생산선상적응용시가행적.