印制电路信息
印製電路信息
인제전로신식
PRINTED CIRCUIT INFORMATION
2011年
8期
42-44
,共3页
曹凑先%张义兵%陆通贵%陈家逢%邓峻
曹湊先%張義兵%陸通貴%陳傢逢%鄧峻
조주선%장의병%륙통귀%진가봉%산준
线路板%热风整平%上锡不良%界面合金层%克氏空孔
線路闆%熱風整平%上錫不良%界麵閤金層%剋氏空孔
선로판%열풍정평%상석불량%계면합금층%극씨공공
PCB%HAL%Dewetting%IMC%Kirkendall Voids
热风整平工艺能得到一个平滑而均匀的焊料涂覆层而被广泛的应用于PCB行业。然而,针对该工艺的品质保证绝非易事。热风整平工艺受助焊剂、温度等因素的影响,在品质上容易出现上锡不良、涂层不均匀等不良问题。本文利用X-Ray、SEM、EDS等分析手段对热风整平工艺中的上锡不良问题进行了分析探讨。结果发现:上锡不良PAD位存在克氏空孔,锡层中含有铜元素,其原因是基板中的Cu原子以扩散方式通过界面Cu6Sn5层进入锡面基体中所致,造成上锡不良,导致可焊性差。
熱風整平工藝能得到一箇平滑而均勻的銲料塗覆層而被廣汎的應用于PCB行業。然而,針對該工藝的品質保證絕非易事。熱風整平工藝受助銲劑、溫度等因素的影響,在品質上容易齣現上錫不良、塗層不均勻等不良問題。本文利用X-Ray、SEM、EDS等分析手段對熱風整平工藝中的上錫不良問題進行瞭分析探討。結果髮現:上錫不良PAD位存在剋氏空孔,錫層中含有銅元素,其原因是基闆中的Cu原子以擴散方式通過界麵Cu6Sn5層進入錫麵基體中所緻,造成上錫不良,導緻可銲性差。
열풍정평공예능득도일개평활이균균적한료도복층이피엄범적응용우PCB행업。연이,침대해공예적품질보증절비역사。열풍정평공예수조한제、온도등인소적영향,재품질상용역출현상석불량、도층불균균등불량문제。본문이용X-Ray、SEM、EDS등분석수단대열풍정평공예중적상석불량문제진행료분석탐토。결과발현:상석불량PAD위존재극씨공공,석층중함유동원소,기원인시기판중적Cu원자이확산방식통과계면Cu6Sn5층진입석면기체중소치,조성상석불량,도치가한성차。
HASL is widely applied in PCB industry for its ability of obtaining an even and smooth layer of plated solder.However,it's not so easy to always keep the good quality of such a process.HASL is influenced by factors like the flux quality,temperature etc,so it's inclined to cause to defects like dewetting,unevenness of the plated solder layer.The paper hereby studies defects like dewetting in the HASL process through application of the analysis methods like X-Ray,SEM,EDS and so on.Achievements of the study are: PADs with dewetting is found out of Kirkendall Voids inside and Cu element in the solder layer.The reason is that Cu atoms in the substrate spread into the tin layer through the Cu6Sn5 layer which leads to dewetting of the layer that reduces the solderability.