合成化学
閤成化學
합성화학
CHINESE JOURNAL OF SYNTHETIC CHEMISTRY
2010年
z1期
118-124
,共7页
梅中杰%史鸿鑫%项菊萍%武宏科%陈立军
梅中傑%史鴻鑫%項菊萍%武宏科%陳立軍
매중걸%사홍흠%항국평%무굉과%진립군
非离子型表面活性剂%含氟聚氨酯%甲苯-2,4-二异氰酸酯%聚乙二醇%合成%性能
非離子型錶麵活性劑%含氟聚氨酯%甲苯-2,4-二異氰痠酯%聚乙二醇%閤成%性能
비리자형표면활성제%함불취안지%갑분-2,4-이이청산지%취을이순%합성%성능
以甲苯-2,4-二异氰酸酯(2,4-TDI)、2-甲氧基-3-全氟壬烯氧基丙醇和聚乙二醇(PEG)等为主要原料,通过分布缩合得到一种非离子型含氟聚氨酯表面活性剂,并利用红外光谱对其进行了表征.讨论了加料方式、亲水单体相对分子质量、聚乙二醇用量等因素对产品性能的影响.实验结果表明,当n(2,4-TDI);n(氟醇);n(PEG)=1:1:1.1时,采用先加入TDI和氟醇,反应一段时间后滴加PEG的加料方式,能够合成得到综合性能较好的非离子型含氟聚氨酯表面活性剂.对该表面活性剂在水相中的表面活性进行了测试,所制得的非离子型含氟聚氨酯表面活性剂(FPU-1)的相对分子质量为1310,其临界胶束浓度约为9.54×10-5mol/L,水溶液的最低表面张力为20.88mN/m.
以甲苯-2,4-二異氰痠酯(2,4-TDI)、2-甲氧基-3-全氟壬烯氧基丙醇和聚乙二醇(PEG)等為主要原料,通過分佈縮閤得到一種非離子型含氟聚氨酯錶麵活性劑,併利用紅外光譜對其進行瞭錶徵.討論瞭加料方式、親水單體相對分子質量、聚乙二醇用量等因素對產品性能的影響.實驗結果錶明,噹n(2,4-TDI);n(氟醇);n(PEG)=1:1:1.1時,採用先加入TDI和氟醇,反應一段時間後滴加PEG的加料方式,能夠閤成得到綜閤性能較好的非離子型含氟聚氨酯錶麵活性劑.對該錶麵活性劑在水相中的錶麵活性進行瞭測試,所製得的非離子型含氟聚氨酯錶麵活性劑(FPU-1)的相對分子質量為1310,其臨界膠束濃度約為9.54×10-5mol/L,水溶液的最低錶麵張力為20.88mN/m.
이갑분-2,4-이이청산지(2,4-TDI)、2-갑양기-3-전불임희양기병순화취을이순(PEG)등위주요원료,통과분포축합득도일충비리자형함불취안지표면활성제,병이용홍외광보대기진행료표정.토론료가료방식、친수단체상대분자질량、취을이순용량등인소대산품성능적영향.실험결과표명,당n(2,4-TDI);n(불순);n(PEG)=1:1:1.1시,채용선가입TDI화불순,반응일단시간후적가PEG적가료방식,능구합성득도종합성능교호적비리자형함불취안지표면활성제.대해표면활성제재수상중적표면활성진행료측시,소제득적비리자형함불취안지표면활성제(FPU-1)적상대분자질량위1310,기림계효속농도약위9.54×10-5mol/L,수용액적최저표면장력위20.88mN/m.