材料开发与应用
材料開髮與應用
재료개발여응용
DEVELOPMENT AND APPLICATION OF MATERIALS
2002年
4期
8-11
,共4页
化学镀%Ni-P-SiC复合镀层%性能
化學鍍%Ni-P-SiC複閤鍍層%性能
화학도%Ni-P-SiC복합도층%성능
采用化学镀方法制备了Ni-P-SiC复合镀层,系统研究了镀液中SiC含量和粒径对镀层结构及显微硬度的影响.结果表明,镀层中SiC析出量随镀液中SiC含量的增加而增加,在SiC含量一定的情况下,当SiC粒径为7.0μm时,析出量最大;镀液中SiC的含量和粒度对原始镀层的硬度影响不大,但对400℃热处理后的镀层硬度有显著影响.
採用化學鍍方法製備瞭Ni-P-SiC複閤鍍層,繫統研究瞭鍍液中SiC含量和粒徑對鍍層結構及顯微硬度的影響.結果錶明,鍍層中SiC析齣量隨鍍液中SiC含量的增加而增加,在SiC含量一定的情況下,噹SiC粒徑為7.0μm時,析齣量最大;鍍液中SiC的含量和粒度對原始鍍層的硬度影響不大,但對400℃熱處理後的鍍層硬度有顯著影響.
채용화학도방법제비료Ni-P-SiC복합도층,계통연구료도액중SiC함량화립경대도층결구급현미경도적영향.결과표명,도층중SiC석출량수도액중SiC함량적증가이증가,재SiC함량일정적정황하,당SiC립경위7.0μm시,석출량최대;도액중SiC적함량화립도대원시도층적경도영향불대,단대400℃열처리후적도층경도유현저영향.