热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2010年
7期
9-11
,共3页
马泉山%郝维新%耿桂宏%於杨栋
馬泉山%郝維新%耿桂宏%於楊棟
마천산%학유신%경계굉%어양동
过冷%BFe30-2合金%凝固组织%演化
過冷%BFe30-2閤金%凝固組織%縯化
과랭%BFe30-2합금%응고조직%연화
undercooling%BFe30-2 alloy%solidification microstructure%evolution
用熔融玻璃净化与循环过热相结合的方法,研究了BFe30-2合金过冷熔体凝固组织的演化规律.研究表明:在过冷度39~203K的范围内,其凝固组织的形态有三次变化过程:第一次是在39~118K过冷度范围.随着过冷度的增加,凝固组织中枝晶明显细化且同时存在枝品重熔形成的第一类粒状晶;第二次发生在118~174K过冷度范围,因枝晶熟化被抑制,形成的第一类粒状晶转变为高度细化的细枝晶;第i次发生在174~203K过冷度区间,组织因细枝晶再结晶转变为均匀的准球状晶粒.
用鎔融玻璃淨化與循環過熱相結閤的方法,研究瞭BFe30-2閤金過冷鎔體凝固組織的縯化規律.研究錶明:在過冷度39~203K的範圍內,其凝固組織的形態有三次變化過程:第一次是在39~118K過冷度範圍.隨著過冷度的增加,凝固組織中枝晶明顯細化且同時存在枝品重鎔形成的第一類粒狀晶;第二次髮生在118~174K過冷度範圍,因枝晶熟化被抑製,形成的第一類粒狀晶轉變為高度細化的細枝晶;第i次髮生在174~203K過冷度區間,組織因細枝晶再結晶轉變為均勻的準毬狀晶粒.
용용융파리정화여순배과열상결합적방법,연구료BFe30-2합금과랭용체응고조직적연화규률.연구표명:재과랭도39~203K적범위내,기응고조직적형태유삼차변화과정:제일차시재39~118K과랭도범위.수착과랭도적증가,응고조직중지정명현세화차동시존재지품중용형성적제일류립상정;제이차발생재118~174K과랭도범위,인지정숙화피억제,형성적제일류립상정전변위고도세화적세지정;제i차발생재174~203K과랭도구간,조직인세지정재결정전변위균균적준구상정립.
The microstructure evolution of undercooled melt of BFe30-2 alloy wag investigated by means of melted glass purification and cyclical superheating.The results indicate that,within the undercooling range(39~203 K),the microstructurc undergoes three transformation processes.Within the first procedure of undercooling range(39~ll 8 K),the coarser dendrites become fine clearly and the first granular is formed by dendrites remelting with the increase of undercoling.Within the second procedure of undercooling range(118~174 K),the first granular changes into highly finer dendrites due to the restrained ripening course.Within the third procedure of undercooling range(174~203 K),a kind ofeven quasi-spherical grain is formed by the recrystallization of highly finer dendrites.