粉末冶金材料科学与工程
粉末冶金材料科學與工程
분말야금재료과학여공정
POWDER METALLURGY MATERIALS SCIENCE AND ENGINEERING
2007年
6期
374-379
,共6页
谭中雄%张世贤%李世钦%杨怡芳%梁诚%何信弘%薄慧云
譚中雄%張世賢%李世欽%楊怡芳%樑誠%何信弘%薄慧雲
담중웅%장세현%리세흠%양이방%량성%하신홍%박혜운
热压%热等静压%烧结%Cr-Si合金%偏析
熱壓%熱等靜壓%燒結%Cr-Si閤金%偏析
열압%열등정압%소결%Cr-Si합금%편석
粉末冶金制作法主要有热压(HP)、热等静压(HIP)及常压烧结(Sinter)三种.采用热压及热等静压法可以很容易地得到高致密化的高温金属硅化物,但若要进行大尺寸的产品烧结,必须提升生产设备的规格和能力,例如加大热压机力吨位、扩大热压炉腔体等,致使设备投资及生产成本相对昂贵.所以大部分厂商宁可采用常压烧结法,虽然该法的高致密化工艺条件不易控制,却因可以制作大尺寸金属硅化物,加上设备投资及生产成本相对降低,使许多大厂已投入相当大的人力和物力在开发此工艺.该文作者试用不同真空烧结温度,造成Cr-Si合金粉末烧结性质的差异,探讨稳定而可大量生产的可行性;并通过对温度的控制,来改善Cr-Si的物理性质与力学性质.结果表明,提高烧结温度会使Cr-Si合金产生部分液相烧结的现象,从而使孔隙率显著下降;但显微结构也随之有偏析与晶粒粗化的现象.
粉末冶金製作法主要有熱壓(HP)、熱等靜壓(HIP)及常壓燒結(Sinter)三種.採用熱壓及熱等靜壓法可以很容易地得到高緻密化的高溫金屬硅化物,但若要進行大呎吋的產品燒結,必鬚提升生產設備的規格和能力,例如加大熱壓機力噸位、擴大熱壓爐腔體等,緻使設備投資及生產成本相對昂貴.所以大部分廠商寧可採用常壓燒結法,雖然該法的高緻密化工藝條件不易控製,卻因可以製作大呎吋金屬硅化物,加上設備投資及生產成本相對降低,使許多大廠已投入相噹大的人力和物力在開髮此工藝.該文作者試用不同真空燒結溫度,造成Cr-Si閤金粉末燒結性質的差異,探討穩定而可大量生產的可行性;併通過對溫度的控製,來改善Cr-Si的物理性質與力學性質.結果錶明,提高燒結溫度會使Cr-Si閤金產生部分液相燒結的現象,從而使孔隙率顯著下降;但顯微結構也隨之有偏析與晶粒粗化的現象.
분말야금제작법주요유열압(HP)、열등정압(HIP)급상압소결(Sinter)삼충.채용열압급열등정압법가이흔용역지득도고치밀화적고온금속규화물,단약요진행대척촌적산품소결,필수제승생산설비적규격화능력,례여가대열압궤력둔위、확대열압로강체등,치사설비투자급생산성본상대앙귀.소이대부분엄상저가채용상압소결법,수연해법적고치밀화공예조건불역공제,각인가이제작대척촌금속규화물,가상설비투자급생산성본상대강저,사허다대엄이투입상당대적인력화물력재개발차공예.해문작자시용불동진공소결온도,조성Cr-Si합금분말소결성질적차이,탐토은정이가대량생산적가행성;병통과대온도적공제,래개선Cr-Si적물이성질여역학성질.결과표명,제고소결온도회사Cr-Si합금산생부분액상소결적현상,종이사공극솔현저하강;단현미결구야수지유편석여정립조화적현상.