钛工业进展
鈦工業進展
태공업진전
TAI GONGYE JINZHAN
2012年
4期
39-42
,共4页
钛合金棒材%椭圆-圆孔型系统%孔型设计
鈦閤金棒材%橢圓-圓孔型繫統%孔型設計
태합금봉재%타원-원공형계통%공형설계
设计了钛合金棒材轧制用椭圆-圆孔型,并在φ250横列式轧机进行了椭圆-圆孔型系统和椭圆-方孔型系统轧制钛合金棒材的对比试验.其结果表明,两种孔型系统轧制的棒材力学性能基本一致,组织均为两相区加工组织,无原始β晶界,但椭圆-圆孔型系统轧出的棒材晶粒较细小,等轴晶较多,外表面质量好,可提高钛合金棒材的成品率.轧后检查辊槽表面,发现椭圆-圆孔型系统的辊槽无明显变化,可减少换辊、修辊的次数,降低轧辊消耗.
設計瞭鈦閤金棒材軋製用橢圓-圓孔型,併在φ250橫列式軋機進行瞭橢圓-圓孔型繫統和橢圓-方孔型繫統軋製鈦閤金棒材的對比試驗.其結果錶明,兩種孔型繫統軋製的棒材力學性能基本一緻,組織均為兩相區加工組織,無原始β晶界,但橢圓-圓孔型繫統軋齣的棒材晶粒較細小,等軸晶較多,外錶麵質量好,可提高鈦閤金棒材的成品率.軋後檢查輥槽錶麵,髮現橢圓-圓孔型繫統的輥槽無明顯變化,可減少換輥、脩輥的次數,降低軋輥消耗.
설계료태합금봉재알제용타원-원공형,병재φ250횡렬식알궤진행료타원-원공형계통화타원-방공형계통알제태합금봉재적대비시험.기결과표명,량충공형계통알제적봉재역학성능기본일치,조직균위량상구가공조직,무원시β정계,단타원-원공형계통알출적봉재정립교세소,등축정교다,외표면질량호,가제고태합금봉재적성품솔.알후검사곤조표면,발현타원-원공형계통적곤조무명현변화,가감소환곤、수곤적차수,강저알곤소모.