东北林业大学学报
東北林業大學學報
동북임업대학학보
JOURNAL OF NORTHEAST FORESTRY UNIVERSITY
2007年
12期
34-36
,共3页
常德龙%邱帖轶%王群有%黄文豪%胡伟华%张云岭%李煜延
常德龍%邱帖軼%王群有%黃文豪%鬍偉華%張雲嶺%李煜延
상덕룡%구첩질%왕군유%황문호%호위화%장운령%리욱연
金属木材%磁控溅射%电磁屏蔽效能
金屬木材%磁控濺射%電磁屏蔽效能
금속목재%자공천사%전자병폐효능
通过对木材进行封闭处理,在木材表面进行真空磁控溅射镀膜金属试验,在保持木材本身天然特性的同时,使其具有抗电磁辐射功能.对桐木胶合板进行单侧面和双侧面镀铜、铝膜试验,测试其电磁屏蔽效能.结果表明:三聚氰胺甲醛树脂与硅烷偶联剂混合物质对木材进行封闭,真空室的真空度10-2~10-4MPa,靶材温度为200℃,溅射时间为90 s的工艺参数理想,获得的薄膜厚度为30μm,木材表层镀铜或是镀铝,双侧镀还是单侧镀,在30MHz~1.5GHZ频段之间,电磁屏蔽效能都能达到30dB以上,满足电磁屏蔽要求.双侧面的效果大于单侧面的效果,镀铜的效果大于镀铝的效果.
通過對木材進行封閉處理,在木材錶麵進行真空磁控濺射鍍膜金屬試驗,在保持木材本身天然特性的同時,使其具有抗電磁輻射功能.對桐木膠閤闆進行單側麵和雙側麵鍍銅、鋁膜試驗,測試其電磁屏蔽效能.結果錶明:三聚氰胺甲醛樹脂與硅烷偶聯劑混閤物質對木材進行封閉,真空室的真空度10-2~10-4MPa,靶材溫度為200℃,濺射時間為90 s的工藝參數理想,穫得的薄膜厚度為30μm,木材錶層鍍銅或是鍍鋁,雙側鍍還是單側鍍,在30MHz~1.5GHZ頻段之間,電磁屏蔽效能都能達到30dB以上,滿足電磁屏蔽要求.雙側麵的效果大于單側麵的效果,鍍銅的效果大于鍍鋁的效果.
통과대목재진행봉폐처리,재목재표면진행진공자공천사도막금속시험,재보지목재본신천연특성적동시,사기구유항전자복사공능.대동목효합판진행단측면화쌍측면도동、려막시험,측시기전자병폐효능.결과표명:삼취청알갑철수지여규완우련제혼합물질대목재진행봉폐,진공실적진공도10-2~10-4MPa,파재온도위200℃,천사시간위90 s적공예삼수이상,획득적박막후도위30μm,목재표층도동혹시도려,쌍측도환시단측도,재30MHz~1.5GHZ빈단지간,전자병폐효능도능체도30dB이상,만족전자병폐요구.쌍측면적효과대우단측면적효과,도동적효과대우도려적효과.