仪表技术与传感器
儀錶技術與傳感器
의표기술여전감기
INSTRUMENT TECHNIQUE AND SENSOR
2009年
z1期
210-211
,共2页
聚二甲基硅氧烷%气动微泵%工艺
聚二甲基硅氧烷%氣動微泵%工藝
취이갑기규양완%기동미빙%공예
PDMS%pneumatic micropump%process
聚二甲基硅氧烷(PDMS)气动微型泵由3个PDMS气动微阀构成,依靠3个微阀的蠕动作用实现输运液体的作用.PDMS气动微泵的关键制作工艺是液体通道的弧形化和PDMS层之间、PDMS层与玻璃基片之间的封接.实验证明AZ4620正性光刻胶所制作的阳模能形成剖面形状呈弧形的液体通道.采用等离子体氧化处理法封接技术实现了PDMS层之间、PDMS层与玻璃基片之间的封接,该工艺易操作,封接速度快,而且封接效果好.
聚二甲基硅氧烷(PDMS)氣動微型泵由3箇PDMS氣動微閥構成,依靠3箇微閥的蠕動作用實現輸運液體的作用.PDMS氣動微泵的關鍵製作工藝是液體通道的弧形化和PDMS層之間、PDMS層與玻璃基片之間的封接.實驗證明AZ4620正性光刻膠所製作的暘模能形成剖麵形狀呈弧形的液體通道.採用等離子體氧化處理法封接技術實現瞭PDMS層之間、PDMS層與玻璃基片之間的封接,該工藝易操作,封接速度快,而且封接效果好.
취이갑기규양완(PDMS)기동미형빙유3개PDMS기동미벌구성,의고3개미벌적연동작용실현수운액체적작용.PDMS기동미빙적관건제작공예시액체통도적호형화화PDMS층지간、PDMS층여파리기편지간적봉접.실험증명AZ4620정성광각효소제작적양모능형성부면형상정호형적액체통도.채용등리자체양화처리법봉접기술실현료PDMS층지간、PDMS층여파리기편지간적봉접,해공예역조작,봉접속도쾌,이차봉접효과호.
A polydimethyl siloxane (PDMS) pneumatic micropump is constituted of three active pneumatic micro-valves , and the transport of liquid is realized by Peristaltic working of three valves.Major factors in the fabrication of PDMS pneumatic micropumps are the formation of arc-shaped channel profiles of the liquid channel and bonding PDMS layers as well as bonding between the PDMS layer and the glass slide.AZ4620 positive photoresist was demonstrated the best performance as a positive master for producing a liquid channel with an ideal cross sectional profile.The bonding following plasma cleaning showed the best result was used as the bonding means for fabricating PDMS pneumatic micropumps.This process was demonstrated easy to operate,fast to bond.