橡胶工业
橡膠工業
상효공업
CHINA RUBBER INDUSTRY
2010年
10期
590-593
,共4页
孙业斌%邹华%王鑫%张立群%田明
孫業斌%鄒華%王鑫%張立群%田明
손업빈%추화%왕흠%장립군%전명
甲基乙烯基硅橡胶%镀镍石墨%复合材料%导电性能%导电稳定性
甲基乙烯基硅橡膠%鍍鎳石墨%複閤材料%導電性能%導電穩定性
갑기을희기규상효%도얼석묵%복합재료%도전성능%도전은정성
以镀镍石墨(NCG)为导电填料,制备NCG/甲基乙烯基硅橡胶(MVQ)导电复合材料,并对其物理性能、导电性能和导电稳定性进行研究.结果表明,当NCG用量为180份时,复合材料的导电性能和物理性能均较好;随着储存时间和热老化时间的延长,NCG/MVQ复合材料的体积电阻率均小于0.1 Ω·cm,导电稳定性良好;随着伸长率的增大,NCG/MVQ复合材料的体积电阻率先缓慢增大后迅速增大;当伸长率为25%时,随着拉伸次数的增加,复合材料体积电阻率逐渐增大.
以鍍鎳石墨(NCG)為導電填料,製備NCG/甲基乙烯基硅橡膠(MVQ)導電複閤材料,併對其物理性能、導電性能和導電穩定性進行研究.結果錶明,噹NCG用量為180份時,複閤材料的導電性能和物理性能均較好;隨著儲存時間和熱老化時間的延長,NCG/MVQ複閤材料的體積電阻率均小于0.1 Ω·cm,導電穩定性良好;隨著伸長率的增大,NCG/MVQ複閤材料的體積電阻率先緩慢增大後迅速增大;噹伸長率為25%時,隨著拉伸次數的增加,複閤材料體積電阻率逐漸增大.
이도얼석묵(NCG)위도전전료,제비NCG/갑기을희기규상효(MVQ)도전복합재료,병대기물이성능、도전성능화도전은정성진행연구.결과표명,당NCG용량위180빈시,복합재료적도전성능화물이성능균교호;수착저존시간화열노화시간적연장,NCG/MVQ복합재료적체적전조솔균소우0.1 Ω·cm,도전은정성량호;수착신장솔적증대,NCG/MVQ복합재료적체적전조솔선완만증대후신속증대;당신장솔위25%시,수착랍신차수적증가,복합재료체적전조솔축점증대.