水利学报
水利學報
수리학보
2003年
5期
41-45
,共5页
郭莹%栾茂田%董秀竹%王栋
郭瑩%欒茂田%董秀竹%王棟
곽형%란무전%동수죽%왕동
动力土工试验%动模量%复杂应力条件%三轴-扭剪多功能剪切仪%双向耦合振动试验
動力土工試驗%動模量%複雜應力條件%三軸-扭剪多功能剪切儀%雙嚮耦閤振動試驗
동력토공시험%동모량%복잡응력조건%삼축-뉴전다공능전절의%쌍향우합진동시험
利用新研制的三轴-扭剪多功能剪切仪分别进行了竖向与扭转双向耦合剪切振动、振动三轴和振动扭剪等3种试验,采用内置于三轴室的轴力及扭矩双出力传感器和非接触式微小位移传感器测量荷载与位移,着重研究了均等固结条件下福建标准砂的动模量特性.试验结果表明:动力双向耦合试验在扭转方向和竖向的动模量与应变之间的变化规律分别与相同条件下的动扭剪、动三轴试验结果一致;归一化动模量与按照参考应变归一化后的应变比之间的关系不再依赖于初始固结压力、密度及应力路径;动三轴试验与动扭剪试验所得到的最大动剪切模量与初始固结应力之间的关系基本一致,与此相比,由动力耦合试验中扭转向振动分量所得到的结果偏高,由动力耦合试验中竖向振动分量所得到的结果又稍低.
利用新研製的三軸-扭剪多功能剪切儀分彆進行瞭豎嚮與扭轉雙嚮耦閤剪切振動、振動三軸和振動扭剪等3種試驗,採用內置于三軸室的軸力及扭矩雙齣力傳感器和非接觸式微小位移傳感器測量荷載與位移,著重研究瞭均等固結條件下福建標準砂的動模量特性.試驗結果錶明:動力雙嚮耦閤試驗在扭轉方嚮和豎嚮的動模量與應變之間的變化規律分彆與相同條件下的動扭剪、動三軸試驗結果一緻;歸一化動模量與按照參攷應變歸一化後的應變比之間的關繫不再依賴于初始固結壓力、密度及應力路徑;動三軸試驗與動扭剪試驗所得到的最大動剪切模量與初始固結應力之間的關繫基本一緻,與此相比,由動力耦閤試驗中扭轉嚮振動分量所得到的結果偏高,由動力耦閤試驗中豎嚮振動分量所得到的結果又稍低.
이용신연제적삼축-뉴전다공능전절의분별진행료수향여뉴전쌍향우합전절진동、진동삼축화진동뉴전등3충시험,채용내치우삼축실적축력급뉴구쌍출력전감기화비접촉식미소위이전감기측량하재여위이,착중연구료균등고결조건하복건표준사적동모량특성.시험결과표명:동력쌍향우합시험재뉴전방향화수향적동모량여응변지간적변화규률분별여상동조건하적동뉴전、동삼축시험결과일치;귀일화동모량여안조삼고응변귀일화후적응변비지간적관계불재의뢰우초시고결압력、밀도급응력로경;동삼축시험여동뉴전시험소득도적최대동전절모량여초시고결응력지간적관계기본일치,여차상비,유동력우합시험중뉴전향진동분량소득도적결과편고,유동력우합시험중수향진동분량소득도적결과우초저.