中国激光
中國激光
중국격광
CHINESE JOURNAL OF LASERS
2005年
11期
1577-1582
,共6页
刘军友%孙凤久%于撼江%杨玉玲%严平沅
劉軍友%孫鳳久%于撼江%楊玉玲%嚴平沅
류군우%손봉구%우감강%양옥령%엄평원
激光技术%铁氮化合物%激光等离子体混合法%表面改性%氮化方法
激光技術%鐵氮化閤物%激光等離子體混閤法%錶麵改性%氮化方法
격광기술%철담화합물%격광등리자체혼합법%표면개성%담화방법
采用激光和氮等离子体混合方法在大气气氛下对铁样品表面进行处理,获得了铁氮化合物表层.利用X射线衍射仪(XRD)对氮化处理样品测试,得到样品的相结构.分别使用混合方法与普通激光氮化方法,在相同条件下对样品表面进行氮化处理,结果表明通过混合方法提高了氮化物含量,并有效地抑制了氧化发生.利用扫描电镜(SEM)测量氮化后样品得出氮的最大质量分数可达34.44%,有效氮化层深度可达11.21μm.讨论激光功率密度、氮等离子体流量、扫描速度等参数对混合法氮化效果的影响.在实验条件下,激光功率密度和扫描速度分别与?腚
氮化物衍射峰相对强度成线性递增关系和二次方递减关系.而随着氮等离子体流量的增加,氮化物含量增加;但是当氮等离子体流量大于0.9 m3/h后,氮化所需活化氮达到饱和,氮化物含量不再增加.另外,氮化后样品的硬度得到了增强.
採用激光和氮等離子體混閤方法在大氣氣氛下對鐵樣品錶麵進行處理,穫得瞭鐵氮化閤物錶層.利用X射線衍射儀(XRD)對氮化處理樣品測試,得到樣品的相結構.分彆使用混閤方法與普通激光氮化方法,在相同條件下對樣品錶麵進行氮化處理,結果錶明通過混閤方法提高瞭氮化物含量,併有效地抑製瞭氧化髮生.利用掃描電鏡(SEM)測量氮化後樣品得齣氮的最大質量分數可達34.44%,有效氮化層深度可達11.21μm.討論激光功率密度、氮等離子體流量、掃描速度等參數對混閤法氮化效果的影響.在實驗條件下,激光功率密度和掃描速度分彆與?腚
氮化物衍射峰相對彊度成線性遞增關繫和二次方遞減關繫.而隨著氮等離子體流量的增加,氮化物含量增加;但是噹氮等離子體流量大于0.9 m3/h後,氮化所需活化氮達到飽和,氮化物含量不再增加.另外,氮化後樣品的硬度得到瞭增彊.
채용격광화담등리자체혼합방법재대기기분하대철양품표면진행처리,획득료철담화합물표층.이용X사선연사의(XRD)대담화처리양품측시,득도양품적상결구.분별사용혼합방법여보통격광담화방법,재상동조건하대양품표면진행담화처리,결과표명통과혼합방법제고료담화물함량,병유효지억제료양화발생.이용소묘전경(SEM)측량담화후양품득출담적최대질량분수가체34.44%,유효담화층심도가체11.21μm.토론격광공솔밀도、담등리자체류량、소묘속도등삼수대혼합법담화효과적영향.재실험조건하,격광공솔밀도화소묘속도분별여?정
담화물연사봉상대강도성선성체증관계화이차방체감관계.이수착담등리자체류량적증가,담화물함량증가;단시당담등리자체류량대우0.9 m3/h후,담화소수활화담체도포화,담화물함량불재증가.령외,담화후양품적경도득도료증강.