光电子·激光
光電子·激光
광전자·격광
JOURNAL OF OPTOECTRONICS·LASER
2006年
12期
1492-1496
,共5页
蒋艳%邱凤仙%张蓉仙%周钰明%刘举正%张旭苹
蔣豔%邱鳳仙%張蓉仙%週鈺明%劉舉正%張旭蘋
장염%구봉선%장용선%주옥명%류거정%장욱평
光开关%有机聚合物%热光系数%体积膨胀系数
光開關%有機聚閤物%熱光繫數%體積膨脹繫數
광개관%유궤취합물%열광계수%체적팽창계수
用3,3',4,4'-联苯四甲酸二酐(BPDA)、4,4'-二胺基二苯醚(4,4'-ODA)和分散红1(DR1)合成了可制作光波导器件的聚酰亚胺(PI)有机聚合物,采用示差扫描量热(DSC)、热失重分析(TGA)和紫外吸收光谱等方法对其热稳定性和光学性质进行了表征.DSC和TGA结果显示,该PI的玻璃化转变温度(Tg)为248℃,在5%的热失重温度为285℃,表明具有非常好的热稳定性.演示了用阿贝折射仪测定该材料的折射率(n)和热光系数(dn/dT)的方法;通过改变PI含量的方法,方便地实现了聚合物体系的折射率控制;通过热光系数的测量,计算了聚合物的介电常数(ε)、介电热光系数(dε/dT)和体积热膨胀系数β及其变化率(dβ/dT).制得的聚合物材料的dn/dT为-2.2615~-3.702 8×10-4K-1,dβ/dT为2.22~6.14×10-7K-1,表明该聚合物在低驱动功率的新型数字热光开关、光通信器件等领域具有潜在的应用前景.
用3,3',4,4'-聯苯四甲痠二酐(BPDA)、4,4'-二胺基二苯醚(4,4'-ODA)和分散紅1(DR1)閤成瞭可製作光波導器件的聚酰亞胺(PI)有機聚閤物,採用示差掃描量熱(DSC)、熱失重分析(TGA)和紫外吸收光譜等方法對其熱穩定性和光學性質進行瞭錶徵.DSC和TGA結果顯示,該PI的玻璃化轉變溫度(Tg)為248℃,在5%的熱失重溫度為285℃,錶明具有非常好的熱穩定性.縯示瞭用阿貝摺射儀測定該材料的摺射率(n)和熱光繫數(dn/dT)的方法;通過改變PI含量的方法,方便地實現瞭聚閤物體繫的摺射率控製;通過熱光繫數的測量,計算瞭聚閤物的介電常數(ε)、介電熱光繫數(dε/dT)和體積熱膨脹繫數β及其變化率(dβ/dT).製得的聚閤物材料的dn/dT為-2.2615~-3.702 8×10-4K-1,dβ/dT為2.22~6.14×10-7K-1,錶明該聚閤物在低驅動功率的新型數字熱光開關、光通信器件等領域具有潛在的應用前景.
용3,3',4,4'-련분사갑산이항(BPDA)、4,4'-이알기이분미(4,4'-ODA)화분산홍1(DR1)합성료가제작광파도기건적취선아알(PI)유궤취합물,채용시차소묘량열(DSC)、열실중분석(TGA)화자외흡수광보등방법대기열은정성화광학성질진행료표정.DSC화TGA결과현시,해PI적파리화전변온도(Tg)위248℃,재5%적열실중온도위285℃,표명구유비상호적열은정성.연시료용아패절사의측정해재료적절사솔(n)화열광계수(dn/dT)적방법;통과개변PI함량적방법,방편지실현료취합물체계적절사솔공제;통과열광계수적측량,계산료취합물적개전상수(ε)、개전열광계수(dε/dT)화체적열팽창계수β급기변화솔(dβ/dT).제득적취합물재료적dn/dT위-2.2615~-3.702 8×10-4K-1,dβ/dT위2.22~6.14×10-7K-1,표명해취합물재저구동공솔적신형수자열광개관、광통신기건등영역구유잠재적응용전경.