北京交通大学学报
北京交通大學學報
북경교통대학학보
JOURNAL OF NORTHERN JIAOTONG UNIVERSITY
2011年
1期
84-88
,共5页
形状记忆聚合物复合材料%折叠%应变能%微屈曲
形狀記憶聚閤物複閤材料%摺疊%應變能%微屈麯
형상기억취합물복합재료%절첩%응변능%미굴곡
Francis等对单向形状记忆聚合物复合材料(EMC)层合板在热激活温度下的折叠变形过程建立了理论分析模型,研究结果表明:在板的整个弯曲过程都存在半波长,且其值恒定不变.实际上,小曲率条件下纤维的微屈曲还没有发生,半波长根本不存在.本文指出其研究中的不足并加以完善.结果表明:纤维微屈曲半波长与板的弯曲曲率之间的关系曲线可分为两个阶段,在小曲率阶段,因超出模型的适用范围被视为无效曲线;在大于小曲率的阶段,随着曲率的增加,半波长趋于稳定,同时该曲线能初步识别出模型的适用与非适用曲率范围.事实表明所提出的改进结果更加符合EMC层合板的弯曲实际.
Francis等對單嚮形狀記憶聚閤物複閤材料(EMC)層閤闆在熱激活溫度下的摺疊變形過程建立瞭理論分析模型,研究結果錶明:在闆的整箇彎麯過程都存在半波長,且其值恆定不變.實際上,小麯率條件下纖維的微屈麯還沒有髮生,半波長根本不存在.本文指齣其研究中的不足併加以完善.結果錶明:纖維微屈麯半波長與闆的彎麯麯率之間的關繫麯線可分為兩箇階段,在小麯率階段,因超齣模型的適用範圍被視為無效麯線;在大于小麯率的階段,隨著麯率的增加,半波長趨于穩定,同時該麯線能初步識彆齣模型的適用與非適用麯率範圍.事實錶明所提齣的改進結果更加符閤EMC層閤闆的彎麯實際.
Francis등대단향형상기억취합물복합재료(EMC)층합판재열격활온도하적절첩변형과정건립료이론분석모형,연구결과표명:재판적정개만곡과정도존재반파장,차기치항정불변.실제상,소곡솔조건하섬유적미굴곡환몰유발생,반파장근본불존재.본문지출기연구중적불족병가이완선.결과표명:섬유미굴곡반파장여판적만곡곡솔지간적관계곡선가분위량개계단,재소곡솔계단,인초출모형적괄용범위피시위무효곡선;재대우소곡솔적계단,수착곡솔적증가,반파장추우은정,동시해곡선능초보식별출모형적괄용여비괄용곡솔범위.사실표명소제출적개진결과경가부합EMC층합판적만곡실제.