CAJ | 학술논문

采用XRD、SEM等表征方法研究钨丝增强(Zr41.2Ti13.8Cu12.5Ni10Be22.5)100-xNbx非晶复合材料的力学行为.研究表明,分别加入x=1,3,5,7(atA)的Nb后,制备的复合材料试样基体仍为非晶态:随Nb含量的增加,钨丝增强(Zr41.2Ti13.8Cu12.5Ni10Be22.5)100-xNbx非晶复合材料的压缩屈服强度提高,塑性应变也随之提高.x=7时,复合材料具有良好的综合性能,压缩屈服强度达2450 MPa,塑性应变达20%.
채용XRD、SEM등표정방법연구오사증강(Zr41.2Ti13.8Cu12.5Ni10Be22.5)100-xNbx비정복합재료적역학행위.연구표명,분별가입x=1,3,5,7(atA)적Nb후,제비적복합재료시양기체잉위비정태:수Nb함량적증가,오사증강(Zr41.2Ti13.8Cu12.5Ni10Be22.5)100-xNbx비정복합재료적압축굴복강도제고,소성응변야수지제고.x=7시,복합재료구유량호적종합성능,압축굴복강도체2450 MPa,소성응변체20%.
Mechanical properties of(Zr41.2Ti13.5Cu12.5Ni10Be22.5)100-xNbx bulk metallic glass(BMG)matrix composites reinforced by tungsten fiber(Wf)were investigated by X-ray diffraction, scanning electron microscope(SEM)and so on. The results show that the matrix of the prepared composites remain amorphous after adding Nb with x=1, 3, 5 and 7, at%, and the compressive yield strength and plastic strain increase with the increase of Nb content. The composites with x=7 possess the excellent comprehensive properties, whose compressive yield strength and plastic strain reach 2450 MPa and 20%, respectively.