环境科技
環境科技
배경과기
ENVIRONMENTAL SCIENCE AND TECHNOLOGY
2011年
4期
1-4
,共4页
梁存珍%刘卫国%陈家庆%孔惠%桑义敏
樑存珍%劉衛國%陳傢慶%孔惠%桑義敏
량존진%류위국%진가경%공혜%상의민
微波强化光催化%无极灯%直接耐酸大红4BS
微波彊化光催化%無極燈%直接耐痠大紅4BS
미파강화광최화%무겁등%직접내산대홍4BS
采用微波无极灯强化光催化对直接耐酸大红4BS的降解进行研究.初步考察反应温度、微波功率、pH值、催化剂TiO2浓度、曝气量、直接耐酸大红4BS初始浓度、外加氧化剂H2O2量等因素对直接耐酸大红4BS降解效果的影响.实验结果表明,反应最佳温度是55℃、最佳催化剂TiO2投加量为6 g/L;较低pH值、高微波功率、外加氧化剂H2O2有利于直接耐酸大红4BS的降解.与常规的光催化相比,微波减弱pH值和染料初始浓度对降解效率的影响.在优化工艺参数和未加H2O2条件下,反应4h后,质量浓度为500 mg/L的直接耐酸大红4BS降解率达到90%.
採用微波無極燈彊化光催化對直接耐痠大紅4BS的降解進行研究.初步攷察反應溫度、微波功率、pH值、催化劑TiO2濃度、曝氣量、直接耐痠大紅4BS初始濃度、外加氧化劑H2O2量等因素對直接耐痠大紅4BS降解效果的影響.實驗結果錶明,反應最佳溫度是55℃、最佳催化劑TiO2投加量為6 g/L;較低pH值、高微波功率、外加氧化劑H2O2有利于直接耐痠大紅4BS的降解.與常規的光催化相比,微波減弱pH值和染料初始濃度對降解效率的影響.在優化工藝參數和未加H2O2條件下,反應4h後,質量濃度為500 mg/L的直接耐痠大紅4BS降解率達到90%.
채용미파무겁등강화광최화대직접내산대홍4BS적강해진행연구.초보고찰반응온도、미파공솔、pH치、최화제TiO2농도、폭기량、직접내산대홍4BS초시농도、외가양화제H2O2량등인소대직접내산대홍4BS강해효과적영향.실험결과표명,반응최가온도시55℃、최가최화제TiO2투가량위6 g/L;교저pH치、고미파공솔、외가양화제H2O2유리우직접내산대홍4BS적강해.여상규적광최화상비,미파감약pH치화염료초시농도대강해효솔적영향.재우화공예삼수화미가H2O2조건하,반응4h후,질량농도위500 mg/L적직접내산대홍4BS강해솔체도90%.