中国工程科学
中國工程科學
중국공정과학
ENGINEERING SCIENCE
2003年
10期
52-55,77
,共5页
数量化理论%工艺参数%正交设计%煤层注水%试验研究
數量化理論%工藝參數%正交設計%煤層註水%試驗研究
수양화이론%공예삼수%정교설계%매층주수%시험연구
应用正交设计优化煤层注水工艺参数的组合,对地质条件稳定的煤层是实现最佳注水效果的一种较好的方法.但是,对于地质条件不断变化的煤层,采用该方法,其效果不一定能满足注水工程要求.为此,针对地质因素为不稳定状态下的煤层及影响煤层注水的地质因素既有定性变量又有定量变量的特征,提出利用数量化理论与正交设计2种方法确定注水工艺参数的最优组合,并进行了工程试验优化研究.试验结果表明,此法节省注水试验工程量,接近实际工程要求.
應用正交設計優化煤層註水工藝參數的組閤,對地質條件穩定的煤層是實現最佳註水效果的一種較好的方法.但是,對于地質條件不斷變化的煤層,採用該方法,其效果不一定能滿足註水工程要求.為此,針對地質因素為不穩定狀態下的煤層及影響煤層註水的地質因素既有定性變量又有定量變量的特徵,提齣利用數量化理論與正交設計2種方法確定註水工藝參數的最優組閤,併進行瞭工程試驗優化研究.試驗結果錶明,此法節省註水試驗工程量,接近實際工程要求.
응용정교설계우화매층주수공예삼수적조합,대지질조건은정적매층시실현최가주수효과적일충교호적방법.단시,대우지질조건불단변화적매층,채용해방법,기효과불일정능만족주수공정요구.위차,침대지질인소위불은정상태하적매층급영향매층주수적지질인소기유정성변량우유정량변량적특정,제출이용수양화이론여정교설계2충방법학정주수공예삼수적최우조합,병진행료공정시험우화연구.시험결과표명,차법절성주수시험공정량,접근실제공정요구.