机械设计与制造
機械設計與製造
궤계설계여제조
MACHINERY DESIGN & MANUFACTURE
2011年
5期
162-164
,共3页
面齿轮%数控铣削%成形法加工
麵齒輪%數控鐉削%成形法加工
면치륜%수공선삭%성형법가공
传统的齿轮加工机床无法完成直齿面齿轮的加工.利用三维模型,对模数为3mm、齿数为89齿的直齿面齿轮的齿形进行了研究,对其采用成形法在数控铣床上加工进行了可行性分析,进而研究了面齿轮成形加工的加工方法.对CA6140加工出的面齿轮毛坯设计了加工工艺,利用MasterCAM9.1软件编制了齿形粗加工、半精加工、精加工的数控铣削程序,最终在CNC-JTGK600数控雕铣机上完成了该齿轮的加工.对成品的测量表明,使用数控铣削的方法可以满足面齿轮加工精度的要求.
傳統的齒輪加工機床無法完成直齒麵齒輪的加工.利用三維模型,對模數為3mm、齒數為89齒的直齒麵齒輪的齒形進行瞭研究,對其採用成形法在數控鐉床上加工進行瞭可行性分析,進而研究瞭麵齒輪成形加工的加工方法.對CA6140加工齣的麵齒輪毛坯設計瞭加工工藝,利用MasterCAM9.1軟件編製瞭齒形粗加工、半精加工、精加工的數控鐉削程序,最終在CNC-JTGK600數控彫鐉機上完成瞭該齒輪的加工.對成品的測量錶明,使用數控鐉削的方法可以滿足麵齒輪加工精度的要求.
전통적치륜가공궤상무법완성직치면치륜적가공.이용삼유모형,대모수위3mm、치수위89치적직치면치륜적치형진행료연구,대기채용성형법재수공선상상가공진행료가행성분석,진이연구료면치륜성형가공적가공방법.대CA6140가공출적면치륜모배설계료가공공예,이용MasterCAM9.1연건편제료치형조가공、반정가공、정가공적수공선삭정서,최종재CNC-JTGK600수공조선궤상완성료해치륜적가공.대성품적측량표명,사용수공선삭적방법가이만족면치륜가공정도적요구.