科学技术与工程
科學技術與工程
과학기술여공정
SCIENCE TECHNOLOGY AND ENGINEERING
2012年
26期
6777-6781
,共5页
三元复合驱%集输%掺水管道%结垢%大庆油田
三元複閤驅%集輸%摻水管道%結垢%大慶油田
삼원복합구%집수%참수관도%결구%대경유전
在三元复合驱生产过程中,包括掺水管道、掺水炉等在内的地面掺水集输系统中存在严重的淤积、结垢,直接造成集输能耗上升,设备、管线极易损坏或寿命缩短等一系列威胁油田正常开发的生产难题.以大庆杏北油田三元复合驱开发区块为研究对象,分析了其地面掺水系统中的结垢物组成.并通过模拟试验研究了影响掺水系统结垢的因素与规律.结果表明,掺水系统中是集硅垢、碳酸垢、腐蚀垢等于一体的含油混合垢,且以硅垢为主,含量占到45%以上.掺水温度、掺水量、掺水压力及含聚浓度均对结垢有影响,但在三元复合驱集输系统正常生产工况条件下,含聚浓度对于垢质的沉积具有更显著的影响.500 mg/L左右的见聚浓度是结垢速率的高峰期.
在三元複閤驅生產過程中,包括摻水管道、摻水爐等在內的地麵摻水集輸繫統中存在嚴重的淤積、結垢,直接造成集輸能耗上升,設備、管線極易損壞或壽命縮短等一繫列威脅油田正常開髮的生產難題.以大慶杏北油田三元複閤驅開髮區塊為研究對象,分析瞭其地麵摻水繫統中的結垢物組成.併通過模擬試驗研究瞭影響摻水繫統結垢的因素與規律.結果錶明,摻水繫統中是集硅垢、碳痠垢、腐蝕垢等于一體的含油混閤垢,且以硅垢為主,含量佔到45%以上.摻水溫度、摻水量、摻水壓力及含聚濃度均對結垢有影響,但在三元複閤驅集輸繫統正常生產工況條件下,含聚濃度對于垢質的沉積具有更顯著的影響.500 mg/L左右的見聚濃度是結垢速率的高峰期.
재삼원복합구생산과정중,포괄참수관도、참수로등재내적지면참수집수계통중존재엄중적어적、결구,직접조성집수능모상승,설비、관선겁역손배혹수명축단등일계렬위협유전정상개발적생산난제.이대경행북유전삼원복합구개발구괴위연구대상,분석료기지면참수계통중적결구물조성.병통과모의시험연구료영향참수계통결구적인소여규률.결과표명,참수계통중시집규구、탄산구、부식구등우일체적함유혼합구,차이규구위주,함량점도45%이상.참수온도、참수량、참수압력급함취농도균대결구유영향,단재삼원복합구집수계통정상생산공황조건하,함취농도대우구질적침적구유경현저적영향.500 mg/L좌우적견취농도시결구속솔적고봉기.