CAJ | 학술논문

在相同的混配棉、前纺工艺、纺纱环境、纺纱流程条件下,针对精梳细号棉纱细小纱疵比粗号棉纱少且布面质量好这一反常问题,分析了细小纱疵产生的原因;并通过试验论证,指出在某一号数范围内的纺纱工艺、牵伸原理、纺纱某些参数的设置与设备不相符的问题;在实际生产中,应注意调节混配棉质量,改进纺纱工艺与管理,制定不同号数范围内棉纱细小纱疵的控制范围,前纺清梳联工序、精梳工序的疵点控制标准。
재상동적혼배면、전방공예、방사배경、방사류정조건하,침대정소세호면사세소사자비조호면사소차포면질량호저일반상문제,분석료세소사자산생적원인;병통과시험론증,지출재모일호수범위내적방사공예、견신원리、방사모사삼수적설치여설비불상부적문제;재실제생산중,응주의조절혼배면질량,개진방사공예여관리,제정불동호수범위내면사세소사자적공제범위,전방청소련공서、정소공서적자점공제표준。
Under the same condition including blending,preparation process,spinning process and spinning flow,regarding the abnormal problem that the fault of the combed cotton yarn with small count is less than that with big count,and the fabric of yarn with small count is better,cause is found and discussed on small count.Practice experiment proves that there are problems such as improper setting in spinning process,draft element,some spinning data with the equipment.In the real production,caution should be made in cotton blending,modification of spinning process and management,control limit of small fault in varieties of count,the control norm of faults in clear and card combination as well as in combing process.