材料导报
材料導報
재료도보
MATERIALS REVIEW
2010年
4期
94-97
,共4页
化学水浴%ZnS薄膜%沉积温度
化學水浴%ZnS薄膜%沉積溫度
화학수욕%ZnS박막%침적온도
chemical bath deposition%ZnS thin films%deposition temperature
采用化学水浴法在玻璃上制备了太阳能电池中的ZnS缓冲层,采用SEM、EDS、XRD和nkd-分光光度计等手段研究了水浴温度对ZnS薄膜的表面形貌、结构和光学性能的影响.结果表明,升高温度不能明显改变薄膜的结晶性、形貌和沉积生长方式.能否成膜与温度的关系也不大,但成膜速率对温度的依赖性较大.随温度的升高,薄膜的透过率先减小后增大,反射率则先增大后减小.对同一试样而言,透过率和反射率对应较好.当温度为70℃时,可制得禁带宽度为3.83eV、符合化学计量比、平整的非晶ZnS薄膜.
採用化學水浴法在玻璃上製備瞭太暘能電池中的ZnS緩遲層,採用SEM、EDS、XRD和nkd-分光光度計等手段研究瞭水浴溫度對ZnS薄膜的錶麵形貌、結構和光學性能的影響.結果錶明,升高溫度不能明顯改變薄膜的結晶性、形貌和沉積生長方式.能否成膜與溫度的關繫也不大,但成膜速率對溫度的依賴性較大.隨溫度的升高,薄膜的透過率先減小後增大,反射率則先增大後減小.對同一試樣而言,透過率和反射率對應較好.噹溫度為70℃時,可製得禁帶寬度為3.83eV、符閤化學計量比、平整的非晶ZnS薄膜.
채용화학수욕법재파리상제비료태양능전지중적ZnS완충층,채용SEM、EDS、XRD화nkd-분광광도계등수단연구료수욕온도대ZnS박막적표면형모、결구화광학성능적영향.결과표명,승고온도불능명현개변박막적결정성、형모화침적생장방식.능부성막여온도적관계야불대,단성막속솔대온도적의뢰성교대.수온도적승고,박막적투과솔선감소후증대,반사솔칙선증대후감소.대동일시양이언,투과솔화반사솔대응교호.당온도위70℃시,가제득금대관도위3.83eV、부합화학계량비、평정적비정ZnS박막.
ZnS thin films are prepared by chemical bath deposition on common glass substrates at different deposited temperature.In order to investigate the morphological,structural and optical properties of ZnS thin films have been investigated at different deposited temperature by SEM,EDS,XRD and nkd-spectrophotometer.Results show that with the increase of deposition temperature,the crystallinity,morphology and growth mode can not be improved evidently.Forming film or not is not dependence on the temperature.But the deposition rate of ZnS thin films has to depend on deposition temperature strongly.The transmission decreases firstly,increase finally,the reflectivity is inverse relationship with the temperature increasing.For the same sample,the transmission and reflectivity correspond well each other.When deposition temperature is 70℃,ZnS thin film is smooth and amorphous,near to stoichiometric proportion,3.83eV of band gap.