内燃机学报
內燃機學報
내연궤학보
TRANSACTIONS OF CSICE
2001年
2期
165-168
,共4页
马其成%王青%任京乐%李艳琳%孙志远
馬其成%王青%任京樂%李豔琳%孫誌遠
마기성%왕청%임경악%리염림%손지원
梯度功能材料%小型汽油机%性能%排放
梯度功能材料%小型汽油機%性能%排放
제도공능재료%소형기유궤%성능%배방
通过试验研究,探讨了陶瓷-金属梯度功能材料对小型汽油机性能的影响。采用等离子化学气相沉积技术在摩托车发动机主要零件上渗镀氮化硼和氮化硅,从而形成了陶瓷-金属梯度功能材料。在试验台架上对镀膜处理前后的发动机进行了性能对比试验及耐久性能试验。外特性对比试验结果表明,四冲程发动机的动力性、燃油消耗率和耐久性能均得到了明显改善。分析结果表明,采用陶瓷-金属梯度功能材料可显著改善发动机的耐磨性、润滑性和密封性,从而明显降低发动机的摩擦损失、漏气损失和漏气量。
通過試驗研究,探討瞭陶瓷-金屬梯度功能材料對小型汽油機性能的影響。採用等離子化學氣相沉積技術在摩託車髮動機主要零件上滲鍍氮化硼和氮化硅,從而形成瞭陶瓷-金屬梯度功能材料。在試驗檯架上對鍍膜處理前後的髮動機進行瞭性能對比試驗及耐久性能試驗。外特性對比試驗結果錶明,四遲程髮動機的動力性、燃油消耗率和耐久性能均得到瞭明顯改善。分析結果錶明,採用陶瓷-金屬梯度功能材料可顯著改善髮動機的耐磨性、潤滑性和密封性,從而明顯降低髮動機的摩抆損失、漏氣損失和漏氣量。
통과시험연구,탐토료도자-금속제도공능재료대소형기유궤성능적영향。채용등리자화학기상침적기술재마탁차발동궤주요령건상삼도담화붕화담화규,종이형성료도자-금속제도공능재료。재시험태가상대도막처리전후적발동궤진행료성능대비시험급내구성능시험。외특성대비시험결과표명,사충정발동궤적동력성、연유소모솔화내구성능균득도료명현개선。분석결과표명,채용도자-금속제도공능재료가현저개선발동궤적내마성、윤활성화밀봉성,종이명현강저발동궤적마찰손실、루기손실화루기량。
Experiments were made to investigate influences of Ceramic-MetalFGM (Functionally Gradient Material) on performances of small gasoline engine.FGM was formed on some of the main components of motorcycle engines by PCVD (Plasma Chemical Vapor Deposition) of BN and Si3N4.To investigate its influences,comparison tests on engine performances and durability were carried out on engine test bench.The results of comparison tests under full throttle opening showed that the power output,fuel consumption and durability were improved considerably on a four-stroke engine.Further analysis showed that the improvement comes from the reduction of friction loss and leakage loss.Key Words:Functionally gradient material; Small gasoline engine; Performances; Exhaust emissions