华北工学院学报
華北工學院學報
화북공학원학보
JOURNAL OF NORTH CHINA INSTITUTE OF TECHNOLOGY
2001年
1期
66-69
,共4页
爆炸焊%边界效应%中间材料%碰撞动能
爆炸銲%邊界效應%中間材料%踫撞動能
폭작한%변계효응%중간재료%팽당동능
目的确定Ly12铝合金与A3钢的爆炸焊接条件.方法针对Ly12铝合金与A3钢在直接结合的实验中出现的问题进行了详细的分析研究,提出了在Ly12铝合金（覆板）和A3钢（基板）之间插入中间材料（A3钢薄板）的新的实验方法.结果通过实验确定出Ly12铝合金与A3钢爆炸焊接条件.结论 插入中间材料后,能使Ly12铝合金和A3钢实现良好的焊接.
目的確定Ly12鋁閤金與A3鋼的爆炸銲接條件.方法針對Ly12鋁閤金與A3鋼在直接結閤的實驗中齣現的問題進行瞭詳細的分析研究,提齣瞭在Ly12鋁閤金（覆闆）和A3鋼（基闆）之間插入中間材料（A3鋼薄闆）的新的實驗方法.結果通過實驗確定齣Ly12鋁閤金與A3鋼爆炸銲接條件.結論 插入中間材料後,能使Ly12鋁閤金和A3鋼實現良好的銲接.
목적학정Ly12려합금여A3강적폭작한접조건.방법침대Ly12려합금여A3강재직접결합적실험중출현적문제진행료상세적분석연구,제출료재Ly12려합금（복판）화A3강（기판）지간삽입중간재료（A3강박판）적신적실험방법.결과통과실험학정출Ly12려합금여A3강폭작한접조건.결론 삽입중간재료후,능사Ly12려합금화A3강실현량호적한접.
Aim To determine the explosive welding conditions of thealuminium alloy Ly12 on the A3 steel. Methods A new method with a thin steel plate between the aluminium alloy (composite plate) and the steel (base plate)is adopted after analyzing the problems appeared in the experime nt of direct welding of Ly12 aluminium alloy on A3 steel. Results The correct explosive welding conditions of the Ly12 aluminium alloy and A3 ste el is obtained. Conclusion While the intermediate material is inserted, Ly12 aluminium alloy and A3 steel could be welded successfully.
