无机材料学报
無機材料學報
무궤재료학보
JOURNAL OF INORGANIC MATERIALS
2007年
1期
65-69
,共5页
龚国良%张宝林%李文兰%庄汉锐
龔國良%張寶林%李文蘭%莊漢銳
공국량%장보림%리문란%장한예
燃烧合成%Al2O3-LaPO4复合粉体%力学性能%加工性能
燃燒閤成%Al2O3-LaPO4複閤粉體%力學性能%加工性能
연소합성%Al2O3-LaPO4복합분체%역학성능%가공성능
以Al(NO3)3、LaPO4和柠檬酸为原料,采用低温燃烧方法合成Al2O3-LaPO4复合粉体.在相同热压烧结条件下,ALC50(采用燃烧法合成的复合粉体)相对密度比ALM50(采用球磨混合的复合粉体)提高2.5%,达到98.5%.断口形貌分析显示ALC50中晶粒(平均0.56μm)明显比ALM50中晶粒(平均1.74um)细化.ALC50的强度、韧性分别比ALM50增加11.1%、11.2%,而硬度基本相同.由于弱界面的增加,ALC50钻孔速率比ALM50提高近50%.
以Al(NO3)3、LaPO4和檸檬痠為原料,採用低溫燃燒方法閤成Al2O3-LaPO4複閤粉體.在相同熱壓燒結條件下,ALC50(採用燃燒法閤成的複閤粉體)相對密度比ALM50(採用毬磨混閤的複閤粉體)提高2.5%,達到98.5%.斷口形貌分析顯示ALC50中晶粒(平均0.56μm)明顯比ALM50中晶粒(平均1.74um)細化.ALC50的彊度、韌性分彆比ALM50增加11.1%、11.2%,而硬度基本相同.由于弱界麵的增加,ALC50鑽孔速率比ALM50提高近50%.
이Al(NO3)3、LaPO4화저몽산위원료,채용저온연소방법합성Al2O3-LaPO4복합분체.재상동열압소결조건하,ALC50(채용연소법합성적복합분체)상대밀도비ALM50(채용구마혼합적복합분체)제고2.5%,체도98.5%.단구형모분석현시ALC50중정립(평균0.56μm)명현비ALM50중정립(평균1.74um)세화.ALC50적강도、인성분별비ALM50증가11.1%、11.2%,이경도기본상동.유우약계면적증가,ALC50찬공속솔비ALM50제고근50%.